Search results

Not sure. Have you tried moving the wires away from the quad as far as possible and tried? Sounds like either interference or possibly a bad vtx.

Video does not work at all outside or you only lose video on throttle outside?

The vtx and vrx seem to be compatible. Are you just getting static or blue screen?

What are the parts? VTX? Camera? Goggles/Screen RX?

Good catch! Fixed the link. I replaced the connectors on the charger with deans and xt60 plugs. I change battery plugs all time without issue.

Its a cloner. Thats what I have and it is very durable. Charger that I use. http://www.ebay.com/itm/iMAX-B6-AC-B6AC-Lipo-NiMH-3S-RC-Battery-Balance-Charger-/131082526447?pt=LH_DefaultDomain_0&hash=item1e85209eef Battery that I like and use. (FIXED LINK)...

I'm impressed with that camera at 139.00 usd!

Thats a RX setting isn't it? Seems like I had to do that with my receiver and transmitter.

Thanks for the explanation! Still not sure what was going on. I went ahead and replaced them with Afro 30s, and flashed them with blheli, and now my hex is rock solid :)

I have one esc that has a lot of resistance. (I made sure it was the esc and not the motor by swapping out) The resistance causes the motor to stop instantly (like an electronic breaking) when the throttle is moved to the bottom while the other motors spin down slowly to a stop. Is it time...

I have never ordered from them.

I have ordered several items from banggood. I just hate the wait, but anything coming from over seas takes time.

That is almost the same setup I started with. This is a good starting place, but I would try to find one with higher quality motors such as sunnysky. I had the emax motors, and they are just not durable enough imo. And the fun begins!

Good and cheap do not typically go together lol. Are you looking at building or buying something that is ready to fly?

Looking good! You will have to post some pics/video once you have it in the air :)

Should be 3 phase. Here is a diagram that helped me when I was starting. 2 motors will be wired up reverse. (2 outer wired switched) Make sure rotation is correct before soldering, or use bullet/banana plugs.

Ouch. http://www.ebay.com/sch/i.html?_odkw=M3+35mm+metal&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.XM3+35mm+aluminum.TRS1&_nkw=M3+35mm+aluminum&_sacat=0

I have wired up an iOSDmini without using the ground wires on the iOSD itself. It seems like just a passthrough that requires more work since the iOSD is powered by the pmu. The video works fine, but does anyone know of any issues with bypassing the ground wires on the iOSDmini?

http://www.hobbyking.com/hobbyking/store/RC_PRODUCT_SEARCH.asp?strSearch=stand+offs eBay too.

I had to replace a good pair of t-motor bearings by oiling them with bearing oil. They did not sound as smooth as they did before anymore. I have read that bearing oil will rinse the factory lube away. Bearings are fairly cheap to replace so it is easy enough just to replace rough sounding or...