Search results

Do those channels move when powered up and the radio is on in bf? (Do not do this with the props on)

Are your channels mapped correctly? You will have to arm to use the radio to throttle the motors from the tx.

My gopros and x3 all split at 4gb. I think it is due to NTSF formatting, and not really the camera. I think FAT will allow larger than 4gb. I just noticed your is 500megs so that may in-fact be your camera. What file system are you formatting to?

It does not need to be armed when testing the motors in bf while using the sliders. Can you flip the board upside down in bf? Is there a reason you want to install it upside down?

Are the escs beeping when you connect power?

Fly forward not backward, and find a place with a lot of room to start out with.

Picture or video?

I would give it more time to dry, and then give it another shot. Take it apart and dry it out if you are confident you could get it back together.

Registered for commercial filming.

I have N numbers so I will not be registering through the site :cool:

2217 - 930kv should be plenty of power for a 450mm. I would go lower kv if you do plan on spinning 14 inch props though. Check ecalc for a ball park estimate.

It looks like a good one from what I have seen if it is the same one. Did you try moving components around until it was balanced?

The quad needs to be balanced. hold it in the center and it should stay level. If not move stuff around until it is.

Wow! Thats a significant difference! Thanks for sharing!

What was the distance before the mod? You may have said, but I missed it if you did.

Love the music hahaha ;)

Looks interesting. I think this will be my next project. When are you going to build it out, and fly?

Did you recalibrate the emu on a level surface when you installed it on the new quad? Are any imu errors showing up in the assist sw when you connect it?

Unless you get a black pearl ;) They are expensive, but all you need to do is connect antennas, pick the channel, and then fly.

I am in love with my Taranis, but everyone says that they are a little complicated to setup. There are tons of videos, and sites out there that show how to set it up.