Search results

Yeah just bench testing or goggles.

I'd suggest carbon props aswell. 10" or 11"

https://hobbyking.com/en_us/turnigy-park450-brushless-outrunner-890kv.html https://hobbyking.com/en_us/turnigy-multistar-2213-980kv-14-pole-multi-rotor-outrunner-v2.html :D I just learned how to linko_O Call me Mr Fahrenheit... The turnigy are for your size frame

This sag normally happens after you give it some throttle & or near the end of the pack. I got a few puffed ones but they are used to run my groundstation.

Sometimes voltage sag can be so low its just barely enough to power some systems causing the problems you probably encountered. Look after your lipo's. I only ever balance charge & don't let let them go below the storage charge of 3.8v. When not in use I have them @ 3.8v Dont skimp on batteries...

I've noticed a bit of eye deterioration since wearing goggles. Not much but whether it's age or hobby related it's only close up. I haven't a mount for a cam on this build but soon to buy a dvr so I can record off the av2 from my IRC duo. Just waiting for our overdue payment from work & I'll...

Dang :cool:

Do not bother with turns. What size frame do you have or intend to get.

Little businesses I'm honest with, big ones I'm not so.

Get a refund buy somewhere else & hope they may still turn up. Happened to me loads of times. That's why I buy mostly off ebay. Some woman had a package of mine down the road for about a month. I got a refund, bought elsewhere then her son knocked with an apology & a package. It was like...

Its quite zippy on 4S but 3 you need keep on the throttle a bit more. I'm going to swap the motors on this soon for some 1307 1407.

You could change the connection to whatever you like on lipo's. It really is simple.

:cool:

Bad @ soldering, rip an old TV or hifi apart & practice. It will save you money. & you won't be limited to what you can buy with bullets on.

Opto uses jus power in & 2 signal wires or signal & ground. BEC means they have a capacitor & supply 5v out to the fcb if needed or camera if its 5v. 30amp esc should be ample lol for those motors. Some esc's are blheli which can be accessed through the pass through on the fcb. If they are...

I think you got that wrong. So are you reading like 22v off the single connection. If so you can't have more mah or capacity than a bigger lipo. Its still a 3S the draw is just slower off the 2 batteries. You can't make a bigger capacity battery like that without Rockerfella wanting to take you...

Motor & esc seem fine amp wise. Sounds like it was a dodgy esc. Can't say I've heard of them. I crashed a few weeks ago & it took me about twenty or so minutes to get to it. I thought the motors or at least one of them would have been toast. But all OK. Beacon strength is on 45. So don't have it...

What distance does this happen at. & what camera are we talking about here. But has it a WDR wide dynamic range. Most camera setting have this turned off as default. This might help with background light & even it out a bit. Other than that I would need it in front of me to have a fiddle with. o_O

Not many 6" tri blades out there IMO.

The new aomway commanders have a 72mm IPD but I'm not paying 400. & the ev200 ain't in stock anywhere here yet. I'll have to check what you claim as the fatashark designer said in that video Bardwell did that no bigger IPD I'm future. The skyzones I had said upto 69 but I think it was shorter...