Search results

Race or Acro always make sure your esc's are covered. Electrical tape, shrink wrap or that locktite self adhesive tape that works like tape and wrap combined. I like the last one cause you can put it on without taking the motors off. put a piece under it and then another on top of it and...

I work on Japanese made equipment, Kyocera Copiers, and trust me when I say their definition of access hole is way to small. Ha, That may be why their women or so often desired by American men ;)

for a $5 fix I just ordered extras. Warranties would be a waste of time and money on this in my opinion. My IPD is as far right as they will go and its perfect but that makes me think my head is crooked ;)

Im still new to this also but my first thoughts are: The frame looks thin and you may break a arm if you crash. The esc's look a little small for the size motors, maybe go up to 25-30amp. Everything else looks nice. No fpv info listed though. Also I would add an inch or so of wire to the...

Ran into an issue with my Aomways. They started beeping and turning off randomly for a couple days. Only when plugged in and not on my head. Then pretty much went out. Put it on the bench and figured it had to be the little battery converter cable that comes with it. I really didnt want to...

I had one that wouldnt record while hitting the record button on the controller but there was a button on the monitor that started it recording. It showed such on the display once started.

Ive got the Armattan Chameleon 6" and 5"Ti. Love them both. For freestyle im leaning more on my 6" frame. The 5" with 2306 Oomph's is snappier and better for fast maneuvers but gives up some smoothness to do it, and it has less free fall catch for some reason. The 6" with 2306 emaxes is...

As long as the voltage is higher than the total volts going into it from battery or source it wont explode. 4s is 16v so 20v on 3s should be fine. The uF is how much power is stored and can be pulled out. This is where my understanding gets vague, but it sounds like plenty. Actually the math...

Maybe something got on it and then melted into it. Not sure, cause it does look like arcing.

My take so far on 5 vs 6. the 5 is like a sharp knife that has a slightly loose handle. The 6 ive only had back up and going for a little while but the difference is immediately noticeable. The 6 is smooth like butter and the freestyle full stop is a lot more accurat and smooth.

Drone Pilot: No, I dont believe it was holding a probe and coming at you menacingly. Hunter: Would you believe I thought it was a baby flying Chupacabra?

Nice find.

yest to the esc part. also after crashes into the ground or trees there is commonly pieces of trash that can get into the motor and cause friction. Is the motor or esc hot after arming it for a 15 second period? This is an indication something isnt quite right. Have you hooked it up to...

Who wants a drone without balls? They do whatever you tell them anyways.

Gopro 3+ cause I don't fly good enough not destroy every newer gopro I strap on it. :) does good though. The Foxxer has a pretty good pic though.

new member with 1 post and its to a place that you pay for? Ummmmmmmmmmmmmm im sure its a useful site but this is a bit of fishing at its finest me thinks. Posting like hes an old time member giving newly found advice. my phone and the sides of every page I go to is full of this kind of...

the first 3 little cuts are forward and reversed. Just like seeing my name from way up there.

I dont think ive seen anyone do this so im not sure what to call it. Blind Spin or Inverted Spin?

my guess would be weight distribution . Props on the front look like they may give a little more thrust. Maybe its so all motors spin the same but the front has a little more lift to make up for the front being heavier?