Search results

Don't solder anything till you know if it works or not. And then only if you are confident. Too much heat, caps and stuff may start to slide about. If it's defective, send it back is the best option.. The small copper traces tend to dry out and crack or lift easy. So if its not a big main pad...

My Tricopter would be a banger like the 3 wheeled chariot above.

I would be the delboy with my 3 wheeler Tricopter.

Not a racer, just acro.

95% alone :( That means Im not breaking the law 5% of the time. So I'm not a full time criminal.

No, the white = audio wire will not go into FC. This is only off the cam if it has one. But all vtx has audio input. This would have to be directly connected as osd signal is visual so its overlayed onto the video signal.

Yes you should be able to. Esc black and white, signal & ground goto motor ports 1-4. As for colours black & red are obvious white = signal, Yellow = video signal. If you have a cam with a mic then the white will be audio signal. Blue coming off a smart audio vtx will be smart audio. This...

Spare switch = turtle mode. If I feel I have lost control under 12' then I throttle down ASAP. As going for a punch out you may just plough straight into the earth harder than you where going to. I'm still not that good an acro flier I stay high & safe = stuff lasts that way. I fly both Los...

Did it ever worko_O If I had a penny.......... Ffs... Too many symas too many apps Too little instructions lost in translation. It's @ this point I'm thinking sod this it's easier to build my own. Nearly 4 years later & 3years on here I laugh @ this question. MY SYMA. broke props pinions...

I only own one 4in1 I have on on a 130mm. It's got about 30 hours on it & still going but I just rather piece of mind in separates. A 3in1 is no good to anyone unless you got a tricopter setup on a shelf. Or a twin motor with diff.

I started on Simonk & went through all the teething with them so by the time blheli multishot then dshot came out its too easy. Simonk are big bricks about 25g each with cable you wire a house with. If you can fly acro on Simonk you can fly anything. Like a flying tank with helium balloons & a...

I'm also in the process of making a wooden toy plane for my nephew. Hand carved with a 7v coreless motor in the front. Run off a 3.7v AAA size. I'm still digging for a tiny 2S that is the right shape & weight. A little lego head on a micro switch. I'm hoping it will be light enough & if I angle...

These may not be good enough now. It was meant to be a very lightweight build but I got carried away with tape then when I dug the motor out, I laughed to myself but tried it anyway. So the speed this will probably hit now will be too much resistance on the surfaces for the poor little servos...

This is a clone & a bad one by the sounds of it in the comments section. The only clones I buy are the omnibus f4sd. Quality boards though. I still have a 3 year old cloned SPRF3 that's had more knocks than a thai hooker. It's bladderd in liquid silicone & no connectors except USB. It's been...

Dead weight. = less flight time = less fun :(

I've been flying wings lately. Bit of a change. Trying to get this little sucker to fly But I think I killed the motor at full throttle. Found it in work. It wasn't powerful enough anyway. Maybe without all the tape. So I l will put the smallest motor I got on it 1806 & see how it goes...

I still got my wizard, it was a wizard before there ever was a wizard. It still has the little bee pro on it after 3 years with the emax red bottoms. It's my 2nd fav after my stingy frame. Can't see any reason why a stock setup would fry them esc's. One thing you need to be hotter on is, as...

Let us know after about 20 cycles how they are.

You not said which motors you have But they may be drawing more amps than the esc supplies. Most motors upto 2206 are OK on 20amp. A decent set might just tip that. And most esc's can take a 10 second burst at max throttle. Unless your motor eats 10amp and the esc is 20amp you can fly at full...

Yes all esc need to be the same. Endpoints in the blheli congig need to match what is in betaflight. Have yo messed with pids at all.