Search results

I don't have a F11. I do have a lesser version SJRC Z5, but that's irrelevant. What I wanted to say is..... just in case: check your propellers. Make sure they are not installed either too tight or too loose. Make sure there is no damage to them. Adding : Any chance the F11 has had a crash...

Then please go over your user manual and my previous posts. If you still have question, don't hesitate to come back here and ask.

What did you break? A propeller or a drone's arm? For a broken propeller, refer back to your user manual and my previous posts. For a broken arm, say bye to the drone. If it is just the plastic arm that is broken and not the wiring or the mechanism, you might be able to glue it and duct tap it...

Just to elaborate further...... Your drone consists of 2 sets of propellers, a set marked A and a set marked B. Are are your drone's arms. 2 arms are marked A and the other 2 marked B. A props go to A arm. B props go to B arm. That is a must, cannot be mix and match.

Don't you have the user manual? Refer to it. It is not hard to do. Just remember your drone has 2 different sets of propellers. One set should be marked A and the other B. Look closely, they should be marked. Take a look at your broken prop. Find out if it is A or B, and you replace it with a...

Well, I can't just leave it "oh well". So, I repainted the parts that were meant to be in gold colour. It looks better..........

Printer : Ender 3 w/ 32 bit v4.2.7 silent mobo Material : 1.75mm PLA Slicer : Cura 4.11 Support : No Model parts : 12 parts Note : Original colors were red and gold. After hand painting completed, I spray-painted a layer of clear coat with the idea of protecting the luster of the enamel gold...

I don't know about you fellas. I always find it hard to work with those tiny, slippery hex keys. Many times it slipped out of my hand before I could finish what I intended to do with it. Maybe I have clumsy fingers. I did search for user-friendly handles for them from many hardware stores...

Printer : Ender 3 with 32 bit v4.2.7 silent mobo. Slicer : Cura 4.9 Settings : Vase Mode

bed_level_4.0.zip Download File Please download the zip-file above > unzip it > save to a sd card. This will contain the following : Two bed levelling gcodes, M10 gcode and M25 gcode. ( That is for manual bed level. Refer to tutorial below.) One bed levelling print gcode. ( That is to...

Printer : Ender 3 Slicer : Cura 4.11 Material : 1.75mm PLA filament P.S. The placemat is a square chainmail print.

RE : I also adjusted the speed that the PLA comes out since it was a little slower than it was supposed to be. Don't do that. Stay with the "default" settings until you know what you are doing. No offense intended. .............................................................. My personal...

You answered all except the topic of bed levelling. Did you do the bed levelling at all? Please refer to the link I gave you on Manual Bed Levelling.

I am not proficient enough to teach others on this subject. I can only offer a few "observations" of my own and links to a few tutorials : 1. Creality never sells its Ender 3 under $200US. Never $100. Did you buy a used one or so-called "refurbished" one? 2. Assembling the printer incorrectly is...

Been awhile since I last posted my 3D prints. Here are my latest. Took me about 3 days. Not all of them came out right at first print. Had a few rejects. Printer : Creality Ender 3 Slicer : Cura 4.11

@nicesub The following is a UK site. Maybe that store can help you if you talk to them. www.buildyourowndrone.co.uk

I probably cannot help you, but, maybe, I could pave the way for others...... There are numerous SJRC drones in the market. Which model do you have?

I am afraid I cannot help you much as I do not have the same drone you have. Sorry. Adding ..... I assume that your drone comes with extra propellers (wind blades). Pick a spare set and install into the rotor in question. See if that solves the issue. MAKE SURE you pick the correct set of...

RE : Do I need to go through the set up every time I want to fly? Yes. You have to repeat the "ritual" every time. Can't avoid that.

I am in Canada. I can find those batteries in Amazon.ca. If you are in US, you can find them in Amazon.com. However, they are quite expensive. 7.4V 2800mah Lithium Battery for HS700D C$62.99 each.