transmitter

Hello Everyone, I am new to the forum. I am trying to build my first quad. I connected every component to each other, flashed the Omnibus F3 flight controller through the Cleanflight. Binded the The Flysky FS-I6 to the FS-I6B receiver. The transmitter reads the telemetry data (voltage). When...

I have a eachine 250 racer. I am having an odd problem. When I power on the drone the Video transmits just fine, clear strong signal but after about one second when the drone starts to beep during its boot up routine I loose the video. Any Ideas? Thanks!!!

So was wondering if anybody could help me with how I would calibrate my transmitter and copter on my udi RC 28 - 1 Kestrel? I've flown it about four times and I've lost two of them in the process! So a neighbor finally gave one back that he found when walking his dog and it seems to be working...

Well, I ordered a quad with the wrong transmitter mode that I usually order, it was on my side, I could've send it back, instead I used this as an opportunity to build muscle memory for mode 1 so I feel comfortable flying mode 1 as I do mode 2. How would I go about this? Would it be like...

I have an old Linksys WRT54GS Wi-Fi router that seems like it has the parts needed for a transmitter range upgrade, but I'm not entierly sure what order the parts should be in if I installed the antennas and extra cable to my transmitter. I am indeed a noob when it comes to quadcopters and...

Hi there, I have just purchased a Hubsan x4 107 D+ with FPV as my very first drone and somehow I realised that the transmitter is draining power on the AA batteries too quickly. It seems like the 4 AA batteries rquired would only last me for one full flight. Is that even normal? I have tried...

I have decided to do a DIY Quadcopter. I will be purchasing a starter kit to jump start the project since this is my first DIY. I have some questions concerning the RC transmitter/receiver though. I have made the questions bold. The starter kit comes with: 1) Carbon Fiber Frame 2) CC3D Flight...

Does anyone know if I can remove the annoying beeping thingy in the transmitter and replace it with a nice quiet LED? It comes on and stays on during the entire time it's in "headless" mode. I don't know the transmitter model numbers, but it's used with several JJRC, Wltoys and other 250mm...

Here is a link to the transmitter / reciever I am using: https://www.amazon.com/GoolRC-FS-T6-Proportional-Transmitter-Receiver/dp/B016D91CN0/ref=sr_1_2?ie=UTF8&qid=1479264583&sr=8-2&keywords=flysky+transmitter I want to use the following toggle switch on a spare channel (channel 5 or 6, since...

Hi everyone so this is my first build. The issue i am having is that i have no idea high to connect my flight controller to the transmitter. I have a Turnigy 9x V2 and a Naze32 revision 6 flight controller. How do I connect it for the receiver and the transmitter to work, in other words how do...

I just bought a Syma X8G. Having trouble binding the quad to the transmitter. When I turn on the quad, it just keeps flashing fast LED flashes and won't go to the slower LeD flashes for me to start binding. Don't know what to do. I need it to be fixed now since I have to use it in about 4 hours :(

So just fyi, i really don't know much about quadcopters so i'm sorry if this is stupid or something but i was just browsing through some quadcopters and i stumbled upon this thing...

Hi everyone, I am currently working with a group that is doing research on drone swarm technology (using 30+ vehicles at once), and I was wondering if anyone could give me advice on what choices I have in terms of transmitter antennas. I need a setup that could give me omnidirectional coverage...

I have the FS-i6 transmitter and I am trying to map it in Cleanflight. I am having quite a lot of trouble. I have read many other forums, none of which have worked. Currently I am mapping like this: 4ARTE123 AND I have all of the channels reversed on my RX. This gets everything correct except...

HELP ! I got the Striker 2.4GHz 4.5CH RC Spy Drone (World Tech toys) recently as a gift, and there is no way I succeed to sync / bind the transmitter with the drone itself ! I have been trying more than 150 times, applying the procedure (pushing down / up the left transmitter lever, switching...

I want to buy this quad and I have many of questions. :D So, if some have some time for me, my questions: 1. Is this good link for buying http://www.ebay.com/itm/SYMA-X8G-2-4G-4CH-6-Axis-Gyro-RC-Quadcopter-360-Degree-Rollover-BNF-Version-/252354227582?hash=item3ac17bed7e:g:fhwAAOSw7KJXDjsH ? 2...

So I decided to try quads and I have also decided I like it. Very fun to fly and shoot video with. I purchased a Syma X8W because I wanted a larger unit and am still learning and didn't want to break the bank until I get better at flying. My problem is that the transmitter stopped pairing to...

This is my first build, I fallowed a guide on how to build it on youtube, and my friend suggested that I get the turnigy 9x, because he has been using it and loves it. my problem is that I just got everything put together and wired up, but now I am having trouble binding the D4R2 to the stock...

Hello so I think im having problems with connections between my tx and rx for my quadcopter. Its a turnigy tgy-i6 and tgy-ia6 receiver. Basically the rx signal drops to zero and sometimes disappears off the screen on the tx at only a few meters distance but the quadcopter still responds to...

Hello, I have a brand new transmitter from a Cheerson CX-20 I dont have the quad though, i was wondering if there was any possible way i could use this transmitter on a self built quad. Would have have to purchase this...