Syma X8G won't pair with transmitter. Help!

[Aquinas Hyacinth Toledo]

I just bought a Syma X8G. Having trouble binding the quad to the transmitter. When I turn on the quad, it just keeps flashing fast LED flashes and won't go to the slower LeD flashes for me to start binding. Don't know what to do. I need it to be fixed now since I have to use it in about 4 hours

 

[Quest]

Left stick up then down to bind

 

[Aquinas Hyacinth Toledo]

Left stick up then down to bind

I tried that one. It didn't pair. The controller says it paired but the quad keeps flashing fast led lights. Doesnt go to the solid led lights.

 

[holtneil]

Hi mate turn on transmitter first then quad then full throttle then zero throttle

 

[Aquinas Hyacinth Toledo]

Hi mate turn on transmitter first then quad then full throttle then zero throttle

Hi. I tried that one also. Didn't work. It should go to the slow blinking lights before i can pair but it's just endless fast blinking led lights. Do i need to have this checked by the supplier?

 

[holtneil]

Yes I would have you look on you tube for how to set up and bind
Sorry can't help.much may be Jackson can offer more help.message him and ask him

 

[Aquinas Hyacinth Toledo]

Yes I would have you look on you tube for how to set up and bind
Sorry can't help.much may be Jackson can offer more help.message him and ask him

I see some people also have problems like this on youtube

Some were posted almost a year ago but still, there's no solution i can find on any threads/comment sections. Thanks for your response anyway.

 

[holtneil]

One of the guys on here has done a user manual for the quad it may be worth looking at as a pdf file
http://quadcopterforum.com/threads/smya-x8g-highly-updated-and-improved-user-manual.7952/

 

[Jackson]

Try holding the TX further away. Try calibration, both sticks down and right.

 

[Aquinas Hyacinth Toledo]

Try holding the TX further away. Try calibration, both sticks down and right.

Hi. I think in order to calibrate, you have to pair the transmitter with the quad first. Since i can't pair, there's no way to recalibrate.

 

[Aquinas Hyacinth Toledo]

One of the guys on here has done a user manual for the quad it may be worth looking at as a pdf file
http://quadcopterforum.com/threads/smya-x8g-highly-updated-and-improved-user-manual.7952/

Thanks! But unfortunately, there are no details in this regarding troubleshooting.

 

[Aquinas Hyacinth Toledo]

Just to give an update, the syma x8g worked perfectly after i asked the local distributor to replace the transmitter (so it was a transmitter problem). Did some mods and attached a 2d gimbal and a xiaomi yi camera.

 

[dandor13]

I have the same problem and replaced the board in the quadcopter. I assumed the transmitter was ok because that acted normally. The radio icon came on after throttle up/down and all actions on the LCD screen were correct with controls. I still have the same problem. Ordered a transmitter.