STORM Drone 6 GPS Flying Platform

[Jackson]

Storm controllers are used in many gimbals. Here's an inexpensive one. Looks like you you have a 3 axis one (3 motors.)
http://www.goodluckbuy.com/3-axis-b...orm32-controller-for-gopro-3-4-fpv-black.html

You can also get just the board.
http://www.goodluckbuy.com/index.ph...words=Y&cid=0&q=Storm32+Controller+&x=22&y=12

This may be of some help for understanding the basics. It's 2 axis one but you'll see the fundamentals.

 

[beoir.sicnarf]

After some back and forth with helipal, it seems you need to have the camera hooked up first, or the gimbal does nothing, and it can damage the motors.

So now my issue seems to be one of connecting a non GoPro camera to this. I'm going to try connecting a micro USB to the wire and see what happens.

 

[beoir.sicnarf]

And here's the reply I got from helipal.

Any help?

We are sorry to tell you that this Gimbal is discontinued long time ago and you can find other camera gimbal at below link. Many thanks.

http://www.helipal.com/fpv-system_camera-gimbal.html

 

[beoir.sicnarf]

So I tried to fly the drone, and all went well until I tried to make the rotors go. No luck. It's connected to the transmitter, because when I turn it off, the naza books red like crazy. Turn on the TX and it goes back to normal. Any suggestions?