I lost my Eachine Wizard X220S Betaflight preset...

D

DroneWolf

New Member
So I'm pretty new to fpv drones and I bought a Eachine Wizard X220S.. have had it out a bunch of times and love it! Great beginner drone I reckon!

But...

I crashed it and bust a motor.. and while waiting for a new one in the post I got to messing around in Betaflight... long story short, I messed some stuff up and clicked the revert to default button but (like the noob I am) I didn't know you needed a back up to revert to... so now the thing won't work!

Does anyone have/know where I can get hold of the RTF X220S preset that you have out of the box? Desperate to get flying again! Or any other solutions?

Any help is super appreciated!!!!

DW
 
What flight controller is in it.
Do you fly acro.
If you want I can screenshot my pids & rates. They may have only been stock anyway.
 
There is 3 orange boxes @ the top.
You can save your setup with that & reload if you lose it. If you mess the cli settings up, just do a board reset in the setup tab & reset the gyro while your @ it. You can have 3 different pid settings.
But I could never suss how to change between them in the field. IMG_20180105_174804295-1024x575.jpg
IMG_20180105_175208087_HDR-1024x575.jpg IMG_20180105_174508544_HDR-768x1367.jpg IMG_20180105_174804295-1024x575.jpg
I don't use Dshot yet, I'm on multi.
So this is my config. Keep the cpu load % as low as possible.
 
What Tx do you have.
You may have to set either pwm, ppm or serial in the configuration tab.
Setting modes up is easy.
Arm =Aux1
Flight modes =Aux2
Just set the range for each one.

I have my arm set to SWD & modes on SWC the 3 position switch.
 
Hi All
Very new to this.
I have a problem . I rushed into things straight from the box . When I connected my Drone to beta flight I saw the firmware was out of date and flashed it 3.3.1 which went well but I did not back up the Original one. Now I am having problems with the controller not connecting properly . Sometimes it works then not. It be great if someone can help me please or got a original firmware which had all the settings as I have seen from other people when they set it up straight from the box.
 
You must log in or register to reply here.
Back
Top