Steven Campbell
Well-Known Member
Rebuilding my ground station to be more versatile.
Primary antennas on diversity reciever, antennas on top painters pole 5 meters up, diversity reciever mounts to tripod.
Case contains second basic reciever that can be set to another channel and is connected to secondary lcd input.
Equipment plugs into XT60 bar,
7" LCD screen
2-5s Voltage regulator/stabilizer (case will run on 2-5s batteries)
XT60 balance board for power in (or unregulated voltage from batts)
1in 4 out RCA amplifier
DVR recording
Video out to goggles
12v sockets and volt meter
Will contain 1-2 IMAX-B6 chargers
System will run on 4s 8000mah batts
Voltage monitor with alarm
Work in progress as parts arrive in the mail.
Primary antennas on diversity reciever, antennas on top painters pole 5 meters up, diversity reciever mounts to tripod.
Case contains second basic reciever that can be set to another channel and is connected to secondary lcd input.
Equipment plugs into XT60 bar,
7" LCD screen
2-5s Voltage regulator/stabilizer (case will run on 2-5s batteries)
XT60 balance board for power in (or unregulated voltage from batts)
1in 4 out RCA amplifier
DVR recording
Video out to goggles
12v sockets and volt meter
Will contain 1-2 IMAX-B6 chargers
System will run on 4s 8000mah batts
Voltage monitor with alarm
Work in progress as parts arrive in the mail.