In my previous thread I asked for help because my quad was flipping off of take off. This turned out to be that the FCB was pointing the wrong way in the quad so I had to change the direction in betflight to point forward.
Now the quad matches the betaflight diagram when I tilt and turn it but now for some reason it wont arm. I set up one of the switches on my x9d as an arm switch but now I switch it and the quad wont arm for some reason. all the other switches work tho.
(do note: When I go to the motors tab in betaflight the motors can all spin and I made sure the direction was correct)
Why isn't the quad arming? (my quad is a BNF Eachine Wizard x220)
Update: Solved! throttle and yaw switched themselves so my throttle was above the throttle_min to arm the quad.
Now the quad matches the betaflight diagram when I tilt and turn it but now for some reason it wont arm. I set up one of the switches on my x9d as an arm switch but now I switch it and the quad wont arm for some reason. all the other switches work tho.
(do note: When I go to the motors tab in betaflight the motors can all spin and I made sure the direction was correct)
Why isn't the quad arming? (my quad is a BNF Eachine Wizard x220)
Update: Solved! throttle and yaw switched themselves so my throttle was above the throttle_min to arm the quad.
Last edited:
