Search results

The motors are spinning the correct direction? Have you calibrated the flight controller?

Awesome! Your right, for those I would go with 20amp.

Which motors? There should be a chart that will show amp draw with props. I ran 900kv with 10x5 with 30amp escs. 30amp looks about right.

It does not matter. Here is a pic of mine.

You are correct. You can get power from one esc to power the naze, the rx, and the escs that do not have bec. Thats how I run mine.

I have read that it is a little more stable on bottom, but I have flown both configs with no difference. Do you know if your props are installed the correct way, the motors are spinning the right direction, and that they are numbered correctly?

Those will work, but the escs are a little overkill since the motors only show 10amp max draw on the charts. What are these going on?

Are you wanting to play with the sdk? I thought about it, but I know I could build something similar for much less that would fly just as good.

I would go 6s for sure as it would be the most efficient, but you have to consider charging all of those cells. You can get a gimbal that works independently so no need to worry about your flight controller being compatible. Numbers with 6s. I just realized that was with a 3s here it is...

Everything looks good to me except the motor. You may want a little higher kv on a 4s setup. I would run those motors on a 6s setup. Hover is 85% with the one you picked. This is with the 580kv.

The last image shows everything. I was really surprised to see it this low.

I think the Tarot ZYX-M is a great controller. There have been reports about throttle being dropped below 10% during flight could stop the motors. I never experienced this, but thought I should put it out on the table. Everyone just adjust their radios to not go below 10% during flight. Check...

What is the budget?

Welcome to the interesting world of AP! Either one of those gimbals will be a good investment. I would read/watch a few reviews on each. Here are a couple I found. Mini 3D FeiyuTech G3

I have heard of it, but I have never used it. I am sure there are some other members here that have. Hopefully they will chime in too.

Which flight controller do you have?

telemetry - reports back critical flight information to your radio such as the battery level, flight height, flight distance, aircraft location, etc. so that you can be aware of what is going on during the flight. power mission - not sure about this one. Maybe waypoints? osd - allows you to see...

Seems like the frame rate would be the limiting factor in swift panning, but as Jackson suggested a while back; true filming should be 24 fps :cool: I am really happy with the performance/cost of mine. My gopro with the 4.2mm lens will set you back further than a dji camera/gimbal combo that...

If you cannot find any you can install bootcamp and run windows. https://www.apple.com/support/bootcamp/getstarted/

Looks like this will help, and it is not very expensive ;) http://www.banggood.com/RadioLink-PRM-01-Power-Return-Module-For-AT9-AT10-Transmitter-p-981871.html