Search results

Printer : Anycubic Mega S Slicer : Cura 4.3 Settings : Layer height 0.15mm Wall thickness 1.2 mm Infill 20% Nozzle Temp 200 C Bed 60 C Print speed 50...

The [problem I had was inserting another filament into the extruder so that there will be no gap between 2 filaments inside the tube. Someimes it caught the new filament right away and move it up along the tube, but sometimes it failed to do so. The extruder is finicky.

Printer : Anycubic Mega-S Slicer : Cura 4.3 After a few trials and errors, a multi colour lattice vase is successfully printed. 6 colours : Gold, transparent (more like translucent), green, yellow red and white. Adding...…... The beauty of using this printer for multi-color printing is...

Nice printer, I'm sure you will make great use of it. Just out of curiosity...…. Anycubic Mega -S is priced at C$449. A tag less than your MP. It has larger build plate (210x210x205), very strong and sturdy frame, touch screen, filament sensor (automatic pause printing if out of filament)...

Printer : Ender 3 Nozzle : 0.4 mm Slicer : Cura 4.3 Settings …….. Layer height : 0.2 mm Wall thickness : 1.2 mm Infill : 20% Temperature : 200C (printing), 60 C (bed) Speed : 60 mm/s Support : None Material : PLA 1.75mm

.6mm nozzle for wood filament. I'll keep that in mind. Thank you.

Undead chess set continue...…. Rook Pawn

I came across this chess set apparently featuring the Undead. I printed and hand painted them, except the Pawn. I'll be damned if I had to paint the same model 16 times. :) Chess board is a little too tight for the pieces. I might have to print a bigger board. King ………...

Model size : 130% It is amazing a "budget" 3D printer, Ender 3, can print a model with such definitive minute details. Nothing amiss or incomplete.

Thank you for the compliments. It took me about 2 and 1/2 days. I was using 2 printers for that. Ender 3 and Anycubic Mega S. The Wood filament gave me heartache. Sometimes the prints did not come out nice enough and I had to reprint again. Filament is by Amolen. Cost me C$39.99. Not cheap...

Chess pieces are printed with Transparent and Wood pla filaments. The tallest piece, the King, is about 3 and 1/2 inches tall with a round base of 1.2 inches in diameter. The chess board is printed with White and Gold pla filaments. It's measured at 13.8 in x 13.8 in. The board consists of 80...

Yes. I overlooked the need to lower/raise the bed scenario. I thought the most I had to do is to re-level the bed. I think those used in Ender 3 are called MK8, and those used in Anycubic Mega S are called M6. Just finished replacing the entire extruder hot end in my Ender 3 with a new one from...

I have 2 printers...….. Creality Ender 3 and Anycubic Mega-S I have nozzles that come with each printer. I have noticed that there is a slight difference in size of the .4mm nozzle between the 2 printers. Those used in Mega-S have longer thread than those used in Ender 3. Question : can they be...

I had a very similar issue. My Z5 got stuck high above a tree branch. I shook it down but couldn't catch it. It crashed to the ground. After that, the camera must have broken because it would not connect to my cellphone. It would fly without camera and GPS but who wants that. I ended up buying a...

Read about the Canada new regulations of drone operation via you-tube video. EACH drone weighs over 250 grams is to be "Remote ID" registered individually. So, I have 5 of those over 250 grams, and I doubt if they are compatible to be installed with Remote ID. If they aren't, I am "s---" out of...

I printed a treehouse a month or so ago. It was 70% of the default size, and I had had many mishaps particularly the circular stairs. It had my number. Gods know how many balusters I had broken and glued back! Fittings were bad too. Never quite satisfied with it. 3 days ago, I started to print...

In Cura, under Build Plate Adhesion option, there are 4...…. Brim, Skirt, Draft, None. I know what Brim and Draft are for. I fail to see the usefulness of Skirt. It doesn't seem to have any purpose. Please advise.

Just to be sure, please check the user manual on battery charging. I have drones where red light will come on when charging,, then shut off when fully charged. And I have drones doing the exact opposite.

Merry Christmas to all