Recent content by DiscrafT

I dont have RX so I can't see the image but I thing that the wiring is correct and if I plug everything up leds are working. But the OSD should look somehow like this and you can configure everything through the USB port on PC...

Yes I finally know how to do it because I was confused with that gimbal controlling board that I have to connect thing to it. But now I know that I dont need it at all. I wired up everything and it is working :) It was quite easy cable from the iOSD I plugged to X3 and and NAZA PMU, Camera to PW...

I will replace that Xiaomi with real FPV camera later, but for now I can just plug black-yellow wire from camera into that FPV TX with heatsink and it will work right? But if I also want to have OSD I have to.. Wait.. Do I need that basecam gimbal board at all? Can I somehow just connect...

Hello, I'm repairing one drone and it is equiped with DJI Naza with iOSD mini, SkyZone 5.8GHz 500mW 8ch TX https://hobbyking.com/en_us/skyzone-5-8g-500mw-8-channel-av-transmitter-fpv.html, Quanum AlexMos Brushless Gimbal Controller...

Ok and should I buy propeller balancer for APC prop and balance it with tape or what?

Some of these? https://hobbyking.com/en_us/catalogsearch/result/?erp_category=&q=APC+15x5.5 Because they are even more expensive that those CF which I have on my drone now.

Yes that was the reason why i created this post just to be sure because I suspected that for 2 screws mount I will don't need to care about CW/CCW motor types. But the main question was which propellers are the best in my case. btw. thanks for all replies.

Hi there, I'm rebuilding one hexacopter which I bought from my brother. And on the drone were carbon fiber T propellers 15x5.5 (I'm almost sure) https://hobbyking.com/en_us/multirotor-carbon-fiber-t-style-propeller-15x5-5-black-cw-ccw-2pcs-2.html And these motors MT 3510 600KV link...

Do I have to connect that OSD if I want to have on screen telemetry, right?

Thank you for the channel description. I will do some research tomorrow and order it.

PS: I have some good electronic equipment.

Thank you for the model number. I can see on the Internet some nice wiring schematics, but one maybe stupid question, Why do I need that board when I already have DJI naza which is controlling everything? I'm a bit confused.

Of course but everything has its own purpose. Anyway thank you so much for your advice I will probably buy that flysky Fsi6 and I will hope that 6ch will be enough and could be paired with that naza flight controller. Btw. if you want to I can post other images and my progression when I will...

Yes they are nice but they are overkill for what I need as a beginner.

Yes. Thank you! This thing? Is this for FPV? Another question. From one motor on this gimbal is stripped off cable. It is possible to fix it? Because I can't dissasemble it like brushless motor by unscrewing and taking it apart. Because I wan't to solder to it another and maybe use it for...