Can you help me wire up FPV with OSD?

DiscrafT

DiscrafT

Member
Hello,
I'm repairing one drone and it is equiped with DJI Naza with iOSD mini, SkyZone 5.8GHz 500mW 8ch TX https://hobbyking.com/en_us/skyzone-5-8g-500mw-8-channel-av-transmitter-fpv.html, Quanum AlexMos Brushless Gimbal Controller https://hobbyking.com/en_us/quanum-...-controller-3-axis-kit-basecam-simplebgc.html and I want to connect to it my Xiaomi Yi cam. I have no idea how to wire it up because I don't have any documentation for these things. And if I'm looking for in on the Internet it is quite hard because they are old. I would like to see realtime video from that Xiaomi cam with telemetry on my GearVR googles if that's possible.
Can someone help me what else do I need to how to wire it up?
Thanks!
nqKQaly.jpg

PtuEYlC.jpg

gxlGXna.jpg

gw1EXuG.jpg
 
It's not worth it. The latency is terrible.
To many pixels to process as where a 700tvl is about a quarter of the processing time. Add the weight. But you could try the sj4000 or DB power as these are the same cameras, just different names.
It shouldn't be that hard though as wires a coloured accordingly.
Red= voltage in
Black= ground
Yellow or orange =signal
Audio =white blue or green.

So you just need to tap into them
Probably just a signal & ground wire.
 
I will replace that Xiaomi with real FPV camera later, but for now I can just plug black-yellow wire from camera into that FPV TX with heatsink and it will work right? But if I also want to have OSD I have to.. Wait.. Do I need that basecam gimbal board at all? Can I somehow just connect camera--DJI Naza OSD--TX with working telemetry?Like this?
cabim-fsh3_3_400.jpg
 
DiscrafT said:
I will replace that Xiaomi with real FPV camera later, but for now I can just plug black-yellow wire from camera into that FPV TX with heatsink and it will work right? But if I also want to have OSD I have to.. Wait.. Do I need that basecam gimbal board at all? Can I somehow just connect camera--DJI Naza OSD--TX with working telemetry?Like this?
cabim-fsh3_3_400.jpg
Click to expand...
That photo is a little misleading as it doesn't identify the color codes of the wires or where they're going. What you want to do is quite simple, this pic gives you a better wiring diagram. Video and ground from the Gopro to GND & VIDEO-IN of the iOSD mini, then GND & VIDEO-OUT of the iOSD mini to video and ground in of your vtx. The 3rd wire you see in the image that's bypassing the iOSD mini is just the audio signal.
H3.jpg
 
Yes I finally know how to do it because I was confused with that gimbal controlling board that I have to connect thing to it. But now I know that I dont need it at all. I wired up everything and it is working :) It was quite easy cable from the iOSD I plugged to X3 and and NAZA PMU, Camera to PW and do Video IN on iOSD and Video OUT to 5.8GHZ TX.
 
Yes, the Alexmos controller is totally separate. So in addition to video, you're also seeing the OSD overlay of all the Naza info like voltage, satellites, height, distance etc?
 
You must log in or register to reply here.
Back
Top