Will These Motors Fit a Prop with a 5mm Hole?

[Dylan]

I'm sorry I'm a bit confused with the specs on these motors:
https://www.amazon.com/gp/aw/d/B01E...lSrch&sr=8-4#LUXAddressSelector_1465247087977
Will they fit a prop with a 5mm hole or will I need some kind of adapter? If so, what kind of adapter is this?

 

[Quest]

In the description it states the shaft is 3mm most props come with an adapter insert you would just have to make sure it is for 3mm

 

[Dylan]

In the description it states the shaft is 3mm most props come with an adapter insert you would just have to make sure it is for 3mm

Do http://www.getfpv.com/gemfan-5x3-ca...4_8c8nWBNRWUXIU1ZLp6DFqFkhC75z28bERoC72fw_wcB these or these http://www.getfpv.com/gemfan-5x3-pr...GATPpdriFxuLKxjcuVfBXdDdOeOsVZ9PpaRoCzgHw_wcB ? It doesn't say.

 

[Quest]

Not sure check this link, clearly states adapters included. https://www.google.com/url?sa=t&sou...I0NfnDNWJReYLiyUQ&sig2=GNGZ-U8lTKHGgUFqfFn2dA . Just google your prop size wanted along with 3mm hub and you can find others.

 

[Jackson]

In the description it states the shaft is 3mm most props come with an adapter insert you would just have to make sure it is for 3mm

That can be deceiving. The actual shaft in the motor is 3mm, but the prop adapter part is probably 5mm, the industry standard for these types.

Looks fat.

Note these similar motors where it says M5.

 

[Dylan]

It seems that may be the case. When I measure them it looks like it is a little bit smaller than 5mm but I think that may be the result of the bezel at the top of the screw and me not putting the ruler across a diameter (sorry I took pictures but they are too large to upload!).