Selling a full starter kit with go pro hero 2 and Spectrum DX8 controller

[Phil Nicklin]

6 blade multi-copter with lots of accessories and spare parts and a go pro Hero2

Excellent condition with many spare parts as you can see on the photos.

This multi copter was custom built by a professional, I bought it as a photography project but have not had time to experiment with it and have sadly decided to sell everything as a job lot, collection only.

Everything was purchased from new and here is a inventory and cost of all the parts it is made from.

Also included is a tool box which is full of tools and spare parts etc.

I would like about £700 for the lot but would be open to offers.

My contact number is 07799760993, I am based in Macclesfield, Cheshire.

Below is a itimised list of the Hexacopter Partsand the original price.

£102.80 680mm Carbon Fiber HEX 6 axis copter Frame fr FPV KK Multiwii Rabbit APM NAZA
£250.08 DJI NAZA Multi-Rotor Stabilization Controller & GPS Upgrate Combo
£175 Spektrum DX8 Controller
£36.63 7 inch Professional FPV Aerial Photography LCD Monitor for Ground Station
£43.90 Battery balance charger RC LiPo Li-ion LiFe NiMH NiCd 5 amp 12V
and 240V supply
£59.90 2x Cloverleaf Antenna + 5.8G FPV Video A/V Transmitter/RX 200mW 2Km For RC car
£89.97 3 x Turnigy RC Car 4000mAh 11.1V 3S 30C High Performance LiPo Battery
£8.99 Turnigy 800mAh 3S 20C Lipo Pack
£7.79 USB 2.0 interface to 3 RCA Female Phono S-VIDEO Output Cable A/V Capture Adapter
£29.50 One-shoulder Bracket for FPV Screen, RC Multicopter Helicopter Airplane Car
£2.69 Gopro conversion cable FPV conversion cable for 5.8G FPV TX gopro Video camera
£36.91 SPEKTRUM AR8000 8 CHANEL RECEIVER
£149 6 x Hobbywing SkyWalker 20A ESC for Quadcopter Multicopter & 6 x SUNNYSKY V2216 900KV Brushless Motor MultiCopter KK Multi-Copter Quad
£30 12 x APC Style 10 X 4.7" CW CCW Propellers Quad, Quadcopter, Multicoptor.
£175 Camera Gimbal
£179 GoPro 2 HD HERO2 Outdoor Edition Camcorder
£15.99 Octocopter Power Distribution Board
£10.94 3.5mm Gold Bullet Connectors

£1404.09 Total Price

 

[GJH105775]

6 blade multi-copter with lots of accessories and spare parts and a go pro Hero2

Excellent condition with many spare parts as you can see on the photos.

This multi copter was custom built by a professional, I bought it as a photography project but have not had time to experiment with it and have sadly decided to sell everything as a job lot, collection only.

Everything was purchased from new and here is a inventory and cost of all the parts it is made from.

Also included is a tool box which is full of tools and spare parts etc.

I would like about £700 for the lot but would be open to offers.

My contact number is 07799760993, I am based in Macclesfield, Cheshire.

Below is a itimised list of the Hexacopter Partsand the original price.View attachment 644 View attachment 644

£102.80 680mm Carbon Fiber HEX 6 axis copter Frame fr FPV KK Multiwii Rabbit APM NAZA
£250.08 DJI NAZA Multi-Rotor Stabilization Controller & GPS Upgrate Combo
£175 Spektrum DX8 Controller
£36.63 7 inch Professional FPV Aerial Photography LCD Monitor for Ground Station
£43.90 Battery balance charger RC LiPo Li-ion LiFe NiMH NiCd 5 amp 12V
and 240V supply
£59.90 2x Cloverleaf Antenna + 5.8G FPV Video A/V Transmitter/RX 200mW 2Km For RC car
£89.97 3 x Turnigy RC Car 4000mAh 11.1V 3S 30C High Performance LiPo Battery
£8.99 Turnigy 800mAh 3S 20C Lipo Pack
£7.79 USB 2.0 interface to 3 RCA Female Phono S-VIDEO Output Cable A/V Capture Adapter
£29.50 One-shoulder Bracket for FPV Screen, RC Multicopter Helicopter Airplane Car
£2.69 Gopro conversion cable FPV conversion cable for 5.8G FPV TX gopro Video camera
£36.91 SPEKTRUM AR8000 8 CHANEL RECEIVER
£149 6 x Hobbywing SkyWalker 20A ESC for Quadcopter Multicopter & 6 x SUNNYSKY V2216 900KV Brushless Motor MultiCopter KK Multi-Copter Quad
£30 12 x APC Style 10 X 4.7" CW CCW Propellers Quad, Quadcopter, Multicoptor.
£175 Camera Gimbal
£179 GoPro 2 HD HERO2 Outdoor Edition Camcorder
£15.99 Octocopter Power Distribution Board
£10.94 3.5mm Gold Bullet Connectors

£1404.09 Total Price

Haha, I think this is more than just a beginner kit, it would last a good while, If I had the money I would probably buy it, hopefully your post will get someone a great setup.

 

[Jackson]

Sounds like the deal of the century.

 

[Phil Nicklin]

Yeah, its just sitting here really and I am a bit out of my depth with it, was a bit ambitious to start off on I think. I would like about £700 ideally.

It hasn't been crashed, everything is in perfect working condition.

 

[Phil Nicklin]

http://www.ebay.co.uk/itm/6-blade-m...essories-spectrum-dx8-DJI-Naza-/271913391557?

£100 start price, no reserve.

 

[GJH105775]

@drone newbie


@Nick

 

[Phil Nicklin]

I certainly am, just want rid of the bloody thing. lol.

 

[GJH105775]

I certainly am, just want rid of the bloody thing. lol.

Haha, lol. I was tagging the user named "Drone Newbie", he is building something similar, and I think this would be a\n exceptable way to go at around 1/10th the cost of what he might be doing, that leaves a lot in the budget to upgrade.