Problems with output calibration

L

lemming

New Member
I am using Libre Pilot, and during the process of output calibration, I move the slider and the motors don't turn on. I also tried to calibrate all motors at the same time with no effect. If needed I can supply the model of all components I used.
Thank you in advance!
4923

Components:
OpenPilot CC3D Flight Controller STM32
SimonK 30A ESCs
HobbyPower 2212 920Kv Motors
E51G Power Distribution Board
FlySky Fs-ia6b Reciever
 
Last edited:
Yes, I'd be interested to find out what components you are using. LibrePilot is very outdated and you'd be so much better off using Betaflight if possible.
 
RENOV8R said:
Yes, I'd be interested to find out what components you are using. LibrePilot is very outdated and you'd be so much better off using Betaflight if possible.
Click to expand...
Im using libre pilot because its my first time and im basingf it off a video by AndyRC on youtube. is the interface of betaflight similar?
 
Back
Top