New to QuadCopter World, advices needed

Still looking for any help with my x5c sym changed battery checked for loose props
Changed to hi and still it won t lift off just leans a bit
Sounds like not enough power even with new 600 battery charged to 4.29 on meter
Any help would be highly appericated
 
check to see if the nylon gear on the motor shaft has slide beyond where it needs to mate up with the larger nylon gear.

Also try switching to full power before taking off look at your instructions for this feature
 
I'm not familiar with that quad but are your props spinning the right way?? Two will spin cc and two cow. You have to make sure your props are assigned to the right motor.
 
Thanks
After checking again I found 1 motor not doing the same Rpm as the others
I replaced it and all is fine
Thanks again for your help
 
patriotaki said:
so you think the one i posted is expensive for a first time?
Click to expand...
That depends on how much disposable income you have.

I'm not familiar with the JJRCX1 but I can assure you that in spite of the criticisms posted here the Syma x5c1, which you can get from Amazon for $60 is one of the better low-price toy drones on the current market. Here is a good test video:
 
magic man said:
Thanks
After checking again I found 1 motor not doing the same Rpm as the others
I replaced it and all is fine
Thanks again for your help
Click to expand...
I had a similar problem with my x5c when I first got it. I replaced the motor and it's been flying faithfully for more than a year since then, which includes many crashes and being stuck in a tree for two weeks while enduring two heavy rainstorms. It is amazingly durable and it flies as well or better than any other toy drone I've seen.
 
magic man said:
hi am dentman
i recently purchased a syma x5c quadcopter
i have been flying it for a little over a week
battery shows after charging 4.29
now it wont get off the ground
also one motor not turning
can the battery be the problem?
i ordered new batteries
can anyone help me
Click to expand...
The battery could very well be the problem. There is a "fifteen minute rule" that should be followed with all quads in the low to medium price range. What this means is you should always wait at least fifteen minutes before recharging the battery. Give it a chance to cool down.

This is hard to do when flying on an especially nice day when one session is just not enough. The way around this is to buy a few more batteries. But the problem with this solution is the little drone motors will last a long time if you let them cool down for at least ten minutes between flights, but popping in fresh batteries while the motors are still hot will shorten their lives. So there is a "ten minute rule" for the motors.

My solution to this problem is to have two x5c's and four batteries. This way I can fly for hours without negatively affecting batteries or motors.

Obey the "fifteen minute rule" and your x5c (or any other toy-grade drone) will last a long, long time.
 
magic man said:
Sounds like not enough power even with new 600 battery charged to 4.29 on meter
Click to expand...
That's too high, get another charger.

I hate to recommend this very chintzy thing. Very delicate and finicky, the first insertions were tough. That said the channels are all independent and no matter how many batterries (of various sizes together) or the individual state of charge they come off at a comfy 4.18V .

Build quality crap, charging circuit very good. Have no idea if similar/other color ones will work the same.
http://www.gearbest.com/rc-quadcopters-parts/pp_157815.html

Just saying.
 
You must log in or register to reply here.
Back
Top