New build quad will not take off?????

[coolhuh]

Recently finished my X-Mode Alien quadcopter I built from scratch. Problem is when I tried to fly it, it did not seem to have enough power to take off. I gave it full throttle and it almost lifted off the ground but did not seem to have enough power to lift, just kind of bounced off the ground.

**UPDATE** Now I have enough power to lift off the ground, the problem I am having now is one side lifts much faster than the other and it just flips over. I have flown quadcopters before with no problem but this one I can not get to lift off the ground without it flipping over.

I set up the flight controller by watching a video and theirs flew perfect.

Any suggestions.

Here is the parts list:
Hobby power KK2.15 flight controller V1.95

E-Maxx MT2213 935kv brushless motors. (2)ccw, (2)cw.

Hobby power Simon K 30A ESC

XT60 3.5mm distribution board

3S lipo battery 11.1v 2200mAh

Flysky FS-16 2.4ghz 6ch remote

 

[Altsickeness]

Check prop and motor direction.

 

[Jackson]

Make sure your props are on correctly.

The arrows are pointing to the leading edge and are also indicating which way the props/motors have to spin.

Another.

 

[coolhuh]

Thanks for the replys.

That is what I thought it was so I checked it several times and they are correct.