My first quadrocopter

M

Mackk

New Member
Hi, I just ordered parts for my first build, I wanted to be a good platform for long FPV and to be cheap because I probably destroy many parts while learning to fly.
This is my build:
Frame: Realacc Martian IV 119 banggood
Motor x4: Fire Edition BR2207S 1600kv 140 120 6s banggood
ESC: Anniversary Special Edition Racerstar REV35 35A 6S 35 4x 35A / 6s banggood
Flight Controller: Matek F405-CTR 10 4x30A (Max.4x46A) banggood
Receiver FS-iA6B 14.9 banggood
Battery: ZOP Power 22.2V 4200mAh 6S 600 banggood
Propeller: Gemfan 6X4 6040 High Efficiency 10 banggood
Radio and receiver: FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6B banggood

I know I should ask that question before I ordered parts but I did some deep research I think I have most of the stuff figured out correctly. I will be tremendously
grateful for any advice or correction.
 
One other thing to comment on, your lipo. Zop lipos are crap and lipos are one thing you don't want to skimp on. And being a 7" frame, I think 4200 mah is way too big. Around 220mah is probably good. I just finished a 6" medium range and 1800mah is the sweet spot
 
Back
Top