Mtech Sky drone pro v2

Hi all I am a newbie my name Is John I need to know what motors are in my sky drone pro V2 as in the quad copter or the instructions there is no codes or anything I noticed on the top of the motor there is a number B25b any help would be appreciated thanks John
 
i just flew a sky quad plus v2 1st time i had control of hieght for a minute or two and then it just went up and started to fly away the recall button didnt work and it just kept going and i got it to move back toward me for a few seconds then it just went
 
My other half brought me a m:tech drone
And at first I crashed (a lot) then got the hang of it. Then this morning it decided it wanted to go for a trip on its own accord and I lost it, until my neighbor brought it back. (Return button does nothing I'm sure).
Now half the drone doesn't work what so ever, (blades don't turn) I then decided to take it to bits. After doing this I realised how bad the motors are put together so I have looked on amazon for new motors and decided to buy some syma motors (seeing as they look the same as the m:tech crap). Will let you know how it goes.
 
John armour said:
Hi all I am a newbie my name Is John I need to know what motors are in my sky drone pro V2 as in the quad copter or the instructions there is no codes or anything I noticed on the top of the motor there is a number B25b any help would be appreciated thanks John
Click to expand...
I have brought some syma motors for mine. Will let u know if they work
 
Meatloaf said:
I know its not expensive but has any one got experience with this . My camera is not hd as suggested on the box and the 4 lower buttons on controller do not seem to do anything , other than the light one. It even has a return button that does nothing !!
.There is no lcd so I an unaware of how to check settings , such as power , batterys , trimming etc

Thanks

Dave
Click to expand...
You need to be in headless mode in order for the return function to work
 
Hi newbie here!!!
I got the sky quad pro v2 for Xmas as a starter quad. I was eager to use the return button which it does say it will only work in headless mode as Paul says. However when I had put it in headless mode and let it go out about 20 mtrs I pressed the return button and it flew off the opposite way!!!....lol.
I thought well that works well!!!....not had a decent day since and wondered when I put it into headless mode that i may have had it the wrong way round, would that have caused it to go the wrong way home? Thanks
 
The motors I ordered were unfortunately the wrong ones, so now taking the drone to bits and getting measurements of the motors and order the right ones.
I have spoke to red5 and menkind and both of them said they don't keep motors in stock and all the keep is blades ( dosnt help at all) . So will come back here in a couple of weeks and see if I can help abit more lol
 
Brobroda said:
The motors I ordered were unfortunately the wrong ones, so now taking the drone to bits and getting measurements of the motors and order the right ones.
I have spoke to red5 and menkind and both of them said they don't keep motors in stock and all the keep is blades ( dosnt help at all) . So will come back here in a couple of weeks and see if I can help abit more lol
Click to expand...
Please do
 
Back
Top