Motor sluggishness on new build with naze 32

Charles Dillard

Charles Dillard

Member
Building quad with naze 32 controller. x configuration. On calibration all motors firing ok:


but as you can see, motors 1,3 (lower left, lower right on quad) don't start up with the others when powering on with transmitter, there's a lag. They start at 0:27 about seven seconds after 2,4. All four motors should start simultaneously.

Any thoughts would be appreciated.:(

Parts:

https://vod.ebay.com/vod/FetchOrder...603002&itemid=121902215889&qu=1&ul_noapp=true

http://www.hobbyking.com/hobbyking/store/__12919__D2826_6_2200kv_Outrunner_Motor.html

http://www.ebay.com/itm/like/152349985255?lpid=82&chn=ps&ul_noapp=true
 
Also, as a note here, switched 1 (bad) with 2 at the processor and the problem followed, meaning the problem is at the processor port. Same with port 3 (bad).

Also, new motors, new esc's.

Battery 1800 mAh fully charged.
 
Last edited:
@Jackson, the calibration seemed to work. Motors are spinning at what looks to be same speeds. The maiden is coming soon, weather here in central Virginia is getting bad tho. I will let you know how it goes. Many thanks! :)
 
Just for the hell of it double check rotation and prop placement.

Syma_props_complete__.jpg
 
Yes, always mark my props CCW or CW with arrows, then do a hand test to make sure it's rolling/yawing/pitching in the correct manner. Snow on the way here soon, will be a while before I can test fly this one.
 
Back
Top