MHQ2 build but i cant figure it out im very new

D

Dylan McQueen

Member
I printed out all the parts and bought the 3s kit which had everything but receiver and fpv. This is a receiver my dad let me use but I've tried a lot of different things but i just cant seem to figure it out. could anyone help me get this thing in the air i'm tired of just looking at a the quad laying on my table.
 

Attachments

  • IMG_8865 (1).JPG
    IMG_8865 (1).JPG
    130.7 KB · Views: 7
  • IMG_8866.JPG
    IMG_8866.JPG
    62.6 KB · Views: 8
  • IMG_8867.JPG
    IMG_8867.JPG
    98.7 KB · Views: 8
GJH105775 said:
Hahaha, plenty of people here to help. What do you need in particular? How to wire it?
Click to expand...
Yeah it the flightcontroller gave me 3 female to female plugs and I've tried a few different things. I current separated the wires to try out a thing I saw on YouTube but it didn't work or there is another problem. I could easily put the wires back together if I needed to.
And thanks for the reply!
 
My receiver isn't one like that it has like servo labels or something, I got it off a heli my dad had laying around and my fightcontroller only has 10 pens 5 on top and bottom it's an afroflight32
 
Dylan McQueen said:
My receiver isn't one like that it has like servo labels or something, I got it off a heli my dad had laying around and my fightcontroller only has 10 pens 5 on top and bottom it's an afroflight32
Click to expand...
Can you provide the model number of it and perhaps a picture?
 
Dylan McQueen said:
I took pictures and attached them when I made the post if that's not enough just tell me what I can do to help
Click to expand...
Oh, hahaha. I saw it when I first looked at the post, but forgot about it haha. I see, your question is about the channel for the control.


AIL = CH1
ELE = CH2
Throttle = CH3
RUD = CH4
AUX = CH5
GEAR = CH6
 
Thank you But what do I hook them to in the flightcontroller? It's a afroflight32 and it only has 10 pins 5 on top and bottom? Sorry I'm so new
 
Dylan McQueen said:
Thank you But what do I hook them to in the flightcontroller? It's a afroflight32 and it only has 10 pins 5 on top and bottom? Sorry I'm so new
Click to expand...
Can I get a picture of the bottom? It probably only requires signal and ground, but a look at the bottom of the board should verify that..
 
IMG_8879.JPG
ive hooked it up how i understood it but i still get nothing when i plugged in the battery the receiver light wasnt lit up or very dem. i matched the channels to the matching receiver things.
 
I don't believe that your receiver is SBUS, I am going to look to see if it is, if not you can get a converter or different receiver. Yours is probably PWM.
 
Allow me to verify that this flight controller uses SBUS 100% for sure before you buy anything as I don't know for sure.
 
You must log in or register to reply here.
Back
Top