I lost my Eachine Wizard X220S Betaflight preset...

[DroneWolf]

So I'm pretty new to fpv drones and I bought a Eachine Wizard X220S.. have had it out a bunch of times and love it! Great beginner drone I reckon!

But...

I crashed it and bust a motor.. and while waiting for a new one in the post I got to messing around in Betaflight... long story short, I messed some stuff up and clicked the revert to default button but (like the noob I am) I didn't know you needed a back up to revert to... so now the thing won't work!

Does anyone have/know where I can get hold of the RTF X220S preset that you have out of the box? Desperate to get flying again! Or any other solutions?

Any help is super appreciated!!!!

DW

 

[mozquito1]

What flight controller is in it.
Do you fly acro.
If you want I can screenshot my pids & rates. They may have only been stock anyway.

 

[DroneWolf]

Hi!! Thanks for replying!

It's the stock FC: F3 6DOF
Yes I fly Acro

Your PIDs might be very useful if you don't mind?

Thanks

 

[mozquito1]

I'm just on my way home from work. So I will get them up ASAP. My xj220 has the same board in it, weighing 280g

 

[RENOV8R]

You can also go into the CLI and type in "get diff" and it will show you only what has been changed from default settings. Comes in handy sometimes

 

[mozquito1]

Here you go. Sorry it may be a bad pic, but if if you can't make it out I'll type it out.

 

[mozquito1]

There is 3 orange boxes @ the top.
You can save your setup with that & reload if you lose it. If you mess the cli settings up, just do a board reset in the setup tab & reset the gyro while your @ it. You can have 3 different pid settings.
But I could never suss how to change between them in the field.

I don't use Dshot yet, I'm on multi.
So this is my config. Keep the cpu load % as low as possible.

 

[mozquito1]

What Tx do you have.
You may have to set either pwm, ppm or serial in the configuration tab.
Setting modes up is easy.
Arm =Aux1
Flight modes =Aux2
Just set the range for each one.

I have my arm set to SWD & modes on SWC the 3 position switch.

 

[Lefty0184]

Hi All
Very new to this.
I have a problem . I rushed into things straight from the box . When I connected my Drone to beta flight I saw the firmware was out of date and flashed it 3.3.1 which went well but I did not back up the Original one. Now I am having problems with the controller not connecting properly . Sometimes it works then not. It be great if someone can help me please or got a original firmware which had all the settings as I have seen from other people when they set it up straight from the box.

 

[Lefty0184]

I have checked my status on beta flight and it says this : Arming disable flags: RXLOSS CLI MSP.

 

[RENOV8R]

Josh Bardwell explains the arming disable flags, what they mean and the fix
https://ruclip.com/video/3mOeL8f1dMM/betaflight-3-2-why-won-t-it-arm.html

 

[mozquito1]

The firmware will be in the list when flashing the board. Just reload the previous one or 2, what fcb do you have.

 

[roalroga]

I have the same problem too.
what is the solution?

https://www.dronetrest.com/t/drone-...on-without-responding-to-the-transmitter/8761