betaflight

Hello nice folks, I have successfully "built" my first quad using: Taranis Q7 X RC r-xsr frsky receiver diy-bought frame speedy bee v3 f7 FC Hobbywing skywalker 20A ESC (only PWM is recognized in Betaflight and Inav) emax mt2213 with 10`` props I could bind the receiver fine, I can also speed...

I successfully obtained data from my I2C device in Arduino: #include <Wire.h> ... Wire.begin(); ... // read function: Wire.beginTransmission(address); Wire.write(startAddress >> 8); Wire.write(startAddress & 0xFF); uint16_t numberOfBytesToRead = bytesRemaining...

Here is my second part to my Diatone Mamba. For some reason it wobbled from take-off. I was able to fix most of it, unfortunately it was a windy day. I may need a part 3. In the video, you will see that I ran into a problem but was able to fix it. sometimes, you can never predict what the...

I just did a quick short on the magnetic usb cable. This has been such a life saver for me especially since I tune out in the field. Having bluetooth is the best but if you don't this is a good alternative.

I have an F4 V3 flight controller with Betaflight firmware. Using the Betaflight configuration tool I have set it up and tested the motors using the motor test page in the configuration tool. In this mode the motors all respond correctly and consistently, even with all 4 motors running...

Hi, hopefully someone can help as I am losing hair rapidly. I purchased locally here in New Zealand: BetaFPV LiteRadio 2 FrSky TinyHawk 2 BNF I am totally new to drones/quads so I read first that I need to bind them by changing the radio to D8, which I did, and then hit Bind on the radio and...

Hi I've been researching for a while regarding my first quadcopter build and I was looking to get some advice from the forums. I'm planning a 450 frame with Emax MT2213 (935Kv) motors and 8" props. I was going to pick up the Anniversary Special Edition Racerstar REV35 35A for £20 from banggood...

Hey guys I'm new to the forum after bugging the crap out of people on IG I thought I'd try on here. Drone I own is a eachine wizard xt220. PROBLEM I have been cooking esc's like eggs in the morning... I use a 4s 1500 35c battery and my esc's are just some generic crap that came in the BNF...

My LEDs stopped working after I flashed the FC with a new firmware. Now, Betaflight doesn't even want to save the setting where I turn on LED Strip in Configuration at all. I turn on LED_STRIP but when I reboot it is still off. Do you guys have any idea why? I have a Omnibus Betaflight F3...

I have a new Eachine Wizard X220 RTF with FlySky FS-i6. When I plugged the battery and turned FlySky on, I encountered it doesn't do anything. Initially I thought I did something wrong, and it seemed weird since it's ready-to-flight version and it should easily work. But it's my first drone and...

Hello, I was wondering if anyone here has some advice on which flight controller platform to use if I want to communicate with it live using a raspberry pi through some serial protocol (preferably mavlink). I've already looked at several, such as betaflight and cleanflight and they either...

Hi Guys, this is my 2nd racing quad I build, because I lost my first one in a neighboorhood. For my first one I had a FC, a PDB and used PPM to connect to the receiver. This time I went for a all in one board, with 4x esc, FC, and PDB, only problem what I'm facing right now is, this board...

So I'm pretty new to fpv drones and I bought a Eachine Wizard X220S.. have had it out a bunch of times and love it! Great beginner drone I reckon! But... I crashed it and bust a motor.. and while waiting for a new one in the post I got to messing around in Betaflight... long story short, I...

Hi, I have a non-working OpenPilot CC3D and I think I messed it up myself. I want to get to the depth of the problem and solve it. I do have a Brain, a Seppuku (dronin) and a couple of Naze32 REV6 Full version boards around but they are all in use. The point is I had installed BetaFlight on it...

Hallo! When I connect betaflight configurator to the flight controller and I turn the radio on, in the receiver tab I see the image of the quadcoper slowly rotating around the yaw axis. The pitch and roll bars indicate 1500 and the yaw bar indicates 1497. The yaw gimbal is centered (by its...

So I have a new Emax Baby Hawk with a FrSky XM plus receiver and a Taranis Q X7 trasmitter. I believe I have done a successful bind but still need to put the Baby Hawk into BetaFlight to set up the mapping such as arming it and switching from Horizon and Acro modes. Well on the receiver tab all...

Last sunday I went to this local park. I haven't been here for months, but man this park is fun to fly. Beautiful weather and a empty park. What else could I wish on a sunday evening. At the end my friend David showed up. I sure knows how to make an entrance LOL [VIDEO]

The first release candidate of Betaflight 3.2 has been released just over 2 weeks ago. After hearing so many good things about it, I decided to test it out myself!

Not too long ago I have purchased the Lux V2 flight controller after I broke my first one. After soldering everything together I went into betaflight to make sure everything was working but I ran into some trouble. I couldn't setup the right receiver mode. When I changed something it just...

I went to a big field for a change instead of a big forest!