HobbyKing Ghost FPV250 Frame and PDB

Zealous Orange

They see me rollin'
Ok, I am working on the finishing touches for my new 250. I have run into a quandary, how do I mount the PDB and flight controller to the frame??? The HK Ghost FPV250 fit comes with some 3mm hex cap screws, but it is just enough for the motors and led arms. I have tried some nylon M3 screws that I bought to mount the FC to the adapter, but they don't "grip" in the space provided. Does anyone have experience with this frame and mounting?
 
Alright, I found a solution!! I was able to use the metal screws to attach the PDB to the frame, this essentially "taped" the plastic allowing me to use the nylon spacers. I did the same on the FC mount that had untapped holes, and allowed for the use of nylon screws. Now if I hadn't been a bonehead and flipped the quad and burned up a motor, I would be able to fly this weekend... Anyone know where to get Multstar 2206 motors? Other than HobbyKing, they are on backorder and tell me it could be a while... Might have to invest in a whole new set of motors.
 
Back
Top