Help with idea

[Clifford Moore]

Can a topselling x6 control board be used in a Bladerunner quadcopter?

 

[GJH105775]

Maybe, but it'll be a little hard, unless you can access the ESC data inputs.

 

[GJH105775]

You could use an Arduino in between if it uses coreless motors.

 

[Clifford Moore]

I was planning on taking the Bladerunner board out and just soldering the X6 board in it's place. They both have built-in gyros and is 2.4ghz wave length. I just like the controler for the x6 better than the Bladerunner. There both use a 3.7v lipo with the same discharge

 

[GJH105775]

If the motors are the same than it should be easy, the board may be tuned a little differently, but it is worth trying.

 

[Clifford Moore]

Thank you dor your help. Let you know how it goes.

 

[Clifford Moore]

It worked but built-in gyro a little unstable because of weight. But thanks for your expertise.

 

[Clifford Moore]

Question for my first build. Do you need a power distribution boad when you have a all in one esc quattro 4 way and flight controller?here is a list of everything I'm ordering.
1- 250mm frame
1-Adam flight controller
1- transmitter & receiver
1-1300Mah nanotec lipo
4-1806 motors
4- 5030 props
1-4way 10-15amp Quattro esc

 

[GJH105775]

I'd suggest you try stay away from 4-in-1 ESCs, most people report lots of problems, and if one goes out you have to pay more. The power distribution board is only to get power where it needs to go, if you only have one device that needs main power, than no. you can also make a power loom if you only have a couple things, or just want to hide it in the frame.

 

[Clifford Moore]

What's a power loom? I still a noob,never built one always bought rtf's.

 

[GJH105775]

Just a way of saying power distribution cable, but you solder it together in a way that will better fit your needs.

 

[Clifford Moore]

Thanks.

 

[Jackson]

It's a tricopter, just add one more set of wires.

 

[Clifford Moore]

So which are better ESC or BESC?

 

[GJH105775]

What are you asking? Are you talking about BEC?

 

[Clifford Moore]

Yes. BEC

 

[GJH105775]

BEC is usually integrated into the ESC. Different jobs, the BEC is a regulator that takes the 12v to 5v. The ESC controls the motors.

 

[Clifford Moore]

Thanks. What's you take on kk2 flight controllers? Would you recommend them?

 

[GJH105775]

If you flash with Stevies it is great, feild adjustable, and easy to setup. Not good for long range though as there is no option of a GPS.

 

[Clifford Moore]

Topselling x6 board does work in bladrunner quad. Had to calabrate gyro.