HELP - Striker Drone - no sync with transmitter

R

rochane

New Member
HELP !
I got the Striker 2.4GHz 4.5CH RC Spy Drone (World Tech toys) recently as a gift, and there is no way I succeed to sync / bind the transmitter with the drone itself ! I have been trying more than 150 times, applying the procedure (pushing down / up the left transmitter lever, switching off / on both transmitter & drone, etc...) but I did not get any sync at all, not even once. The transmitter and drone lights are simply continually flashing without anything else happening. I am starting to get desperate since I did not see any similar situation (no sync at all) described in others reviews I have read on the net.
Can anyone help me on this ? Any advise ? Would be great.... Many thanks in advance !
 
I forgot to mention I have the radio signal level on the transmitter screen which is permanently flashing... this could mean the problem is at transmitter level (rather than drone / receiver itself) ? Many thanks again for any advise / comment !
 
I turn the unit on, then turn the remote on. cycle left rudder. if no work, turn remote off and on and repeat.
took me a few tries but eventually got it
 
sailorsam said:
I turn the unit on, then turn the remote on. cycle left rudder. if no work, turn remote off and on and repeat.
took me a few tries but eventually got it
Click to expand...
You're doing it backwards. Turn the remote on, THEN turn the unit (quad) on
 
Raise the THROTTLE stick up and down. Not the rudder.
 
Last edited:
You are doing it right. Power on quad, then tx. There are two versions of the quad that I know of. One has green landing gear, the other is the black one. And the tx are different.
 
Last edited:
You must log in or register to reply here.
Back
Top