H6C Repair

Rich4985

Rich4985

New Member
hi, complete newb here. I've brought a JJRC H6C but had a pretty heavy crash and broke one of the legs.

I've acquired a replacement body and re assembled the quad from what I can gather as should be. However the quad won't lift and merely squirms around and if given full throttle flips over. The trim appears to be correct but that's about it.

Any help please guys?
 
Should probably mention I have swapped the motors and circuit board with a neighbours and still experience the same problem.
 
Try to re-calibrate the gyros.

Set it on a flat surface and bind the quad with the transmitter. Then set it to 100% on transmitter and then move both sticks to lower left position and hold it like that until quad start to flash rapidly. Your gyros should now be calibrated.
 
Hi mate are props on the right motors, spin the right way and right way up the quad as look from over the top front forward
Left front spins CW, right front CCW, back left CCW ,back right CW , I did this video for one of the guy on here about props its the same on hobby grade quads as the micro and toy grade so this may help
 
Back
Top