First FPV build, can you guys help me out?

S

Sparky2697

Member
Hey guys!
I was wondering if you guys could recommend a build for me, I did a lot of research and am not sure which way to go.

Frame:
Makerfire H250 All Carbon Fiber Quadcopter Frame
http://amzn.com/B00PH4659O

Power Distribution Board:
ARRIS® CC3D Naze32 Flight Controller Mini Power Distribution Board w/LED (Comes with BEC 5V-12V output) for 250 Multicopter
http://amzn.com/B00UFK8VJ2

Flight Controller:
EMAX Skyline32 Naze32 Flight Controller Advanced Version for FPV Racing QAV250 Quadcopter etc
http://amzn.com/B014WCFEN4

ESC:
Crazepony® 4pcs Emax DLHeli Nano 20A ESC OneShot125 For FPV QAV250 Quadcopter
http://amzn.com/B00YUIYP0O

Motors:
Crazepony® 4pcs Emax MT2213 935KV 2CW 2CCW Brushless Motor or DJI F450 F550 Quad Hex Octo Copter
http://amzn.com/B00XY6T1W0

Props:
Cheerwing® 8PCS Carbon Nylon 10x4.5" 1045 CW CCW Propeller Multicopter QuadCopter Black & Orange Ship From US
http://amzn.com/B00KMJOKE6


Batteries:
2 Packs Floureon 3S 25C 11.1V 2200mAh Li-Polymer Lipo RC Battery Pack with XT60 Plug Connector for RC Helicopter RC Airplane RC Hobby
http://amzn.com/B00LZKHNG8

FPV Set:
FatShark Teleporter V5 FPV 5.8G Video Goggles W/ Head Tracking (Transmitter and 700L CMOS Camera Included) Fat Shark FSV1088 RTF FPV KIT
http://amzn.com/B01BWO29PQ

Controller and Receiver:
GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter for RC Helicopter Glider with FS-iA6 Receiver
http://amzn.com/B00VE3PZ3Y



How does this look?
Would it fly?
 
The flight controller only supports CPPM(AKA PPM), however your receiver is PWM. I suggest you find another similar flight controller that supports PWM, or get another reciever that should be compadable with your radio. Your radio takes 4*AA batteries, so you'd want to either upgrade it or choose something like the Orange brand or the Turnigy 9x.


You should be able to easily find another very similar flight controller that supports PWM.


The earlier versions of the Teleporters are not very liked due to the resolution of the tiny screens, so you might want to get the quantum v2 setup for now, or something like the headplay FPV goggles. If budget allows the Fatshark Dominators are fantastic goggles.



For that frame you should have something like 2300kv motors and 4''-6'' props depending on the motors.
The 935kv motors are way to big in this case. I highly suggest the cobra 2300kv or the Emax red bottoms if you're looking for speed, if you are looking for a more mellow flight then something like multistar's motors or some other 2xxx-2300kv motors would be good.

You are also going to need some tools if you don't have a soldering setup. Might need little dds and ends like short pieces of wire, and some XT60 connectors.
 
Sparky2697 said:
Props:
Cheerwing® 8PCS Carbon Nylon 10x4.5" 1045 CW CCW Propeller Multicopter QuadCopter Black & Orange Ship From US
http://amzn.com/B00KMJOKE6
Click to expand...
Ain't happening.

http://www.amazon.com/Crazepony®-GemFan-Propeller-Quadcopter-Multi-rotor/dp/B00Y4QNSFA/ref=pd_sim_21_5?ie=UTF8&dpID=51W-eXiGdDL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=0K61M0JBCME3ZEJYXF2S
These for more aggressive flying.
http://www.amazon.com/Hobby-Ace-Gemfan-Propeller-Multirotor-Quadcopter/dp/B015WKPAZM/ref=pd_sim_21_14?ie=UTF8&dpID=51M4S4ATdOL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=11C8HVG2M8Q0Y455HCWY
Controller and Receiver:
GoolRC Flysky FS-i6 AFHDS 2A 2.4GHz 6CH Radio System Transmitter for RC Helicopter Glider with FS-iA6 Receiver
http://amzn.com/B00VE3PZ3Y
Click to expand...
I'm assuming you want Mode2 (left throttle) it doesn't seem to say which it is.
 
 
How does this look?

Frame:
Makerfire H250 All Carbon Fiber Quadcopter Frame
http://amzn.com/B00PH4659O

Power Distribution Board:
ARRIS® CC3D Naze32 Flight Controller Mini Power Distribution Board w/LED (Comes with BEC 5V-12V output) for 250 Multicopter
http://amzn.com/B00UFK8VJ2

Flight Controller:
EMAX Skyline32 Naze32 Flight Controller Advanced Version for FPV Racing QAV250 Quadcopter etc
http://amzn.com/B014WCFEN4

ESC:
Emax SimonK 12A Brushless ESC Speed Controller For FPV QAV250
http://amzn.com/B00X7LLAT4

Motors:
2 Pairs 2 CW + 2 CCW EMAX MT1806 KV2280 Brushless Motor for QAV 250
http://amzn.com/B00XY6SX38

Props:
5x3 Carbon Fiber Propellers 5030 2 pairs (I’m going to buy 2 sets of these)
http://amzn.com/B00UTGAPYG


Batteries:
2 Packs Floureon 3S 25C 11.1V 2200mAh Li-Polymer Lipo RC Battery Pack with XT60 Plug Connector for RC Helicopter RC Airplane RC Hobby
http://amzn.com/B00LZKHNG8

FPV Set:
(I need to find another FPV set, if you guys could recommend one that would be awesome. I might just not go FPV at first and save up later, my budget for FPV is around $300)
FatShark Teleporter V5 FPV 5.8G Video Goggles W/ Head Tracking (Transmitter and 700L CMOS Camera Included) Fat Shark FSV1088 RTF FPV KIT
http://amzn.com/B01BWO29PQ

Controller and Receiver:
FlySky FS-T6 2.4ghz Digital Proportional 6 Channel Transmitter and Receiver Model
http://amzn.com/B012W6HJHG
 
Props are good size for those motors, and the frame. Either way it would fly. The receiver says it has PPM out, so that should fix your problem.



Your image size is going to be this big(320x240), if that is fine with you then the teleporters should work:
picture-uh=68f022f2986a994bcba685d972f6269-ps=b4eb8bda633979a45e0f8c4d42fb99f.jpg
 
Sparky2697 said:
Would the Quanum Complete FPV Bundle Set be a better choice for a intro to FPV?

Its 640x480 and half the price

http://www.hobbyking.com/hobbyking/..._Video_TX_RX_CP_Antennas_and_Camera_PNF_.html
Click to expand...
I'd strongly suggest you get the V2, a lot of little problems with my V1 set and the V2 seems to have fixed about all of them.

http://www.hobbyking.com/hobbyking/..._FPV_Goggle_V2_w_5_inch_LCD_Monitor_Kit_.html

http://quadcopterforum.com/threads/cheap-yet-good-fpv-setup-to-get-you-started.5162/
 
I jut got the V2s with the Diversity receiver/ camera/ tx and I think Im gonna love it. I only used it once so far, but my gosh its so much better than the RTF stuff I got with my racer 250.

I have Rtf kit monitor, Eachine I6 controller, flysky I6 rx and extra vtx if anyone wants it. :)
 
Altsickeness said:
I jut got the V2s with the Diversity receiver/ camera/ tx and I think Im gonna love it. I only used it once so far, but my gosh its so much better than the RTF stuff I got with my racer 250.

I have Rtf kit monitor, Eachine I6 controller, flysky I6 rx and extra vtx if anyone wants it. :)
Click to expand...
CAn I get a link to that diversity receiver? I was considering adding diversity, but have not needed it yet.
 
GJH105775 said:
I really like it, but out of my price range hahahaha. I think I'll stick with the DIY diversity as shown on RC model reviews.
Click to expand...

Cool. I'll check it out. I want to learn more about making my own stuff. I was watching that guy make an Rf filter the other day and it might have been the same guy making a helical antenna.
 
Back
Top