first build; advice, tips, improvements, will this build work?

steelwall99

steelwall99

New Member
hello im building my first quad rotor. these are some parts i thew together and, i believe everything here is compatible. im trying to build a racing fpv quad, first i will build the quad and add the fpv additions later after i ensure the listed parts are compatible. if these parts here dont work please offer up replacements and variations of any thing you see that needs tweaking.
off to do more research.

parts list. (as of now)
- Hobbyking™ S250 FPV Racer Composit.. $26.32
- DYS BE1806-13 Brushless Motor for Multir.. $37.00
- HobbyKing 12A BlueSeries Brushless Speed.. $33.20
- Openpilot CC3D Flight Controller With Ca.. $24.99
- Hobby King Quadcopter Power Distribution.. $3.99
- Gemfan 5030 Multirotor Propellers One Pa.. $2.22
- Gemfan 5030 Multirotor ABS Propellers On.. $2.22
- Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2.. $25.10
- Turnigy nano-tech 1500mah 3S 35~70C Lipo.. $31.80
- HobbyKing ECO6 50W 5A Balancer/Charger w.. $18.99
- 5.6mm x 13mm M3 Nylon Threaded Spacer (1.. $0.79
- Transparent Polycarbonate Screws M3x6mm .. $0.63
- M3 Nylon Nut (10pcs/bag) $0.69 11
Turnigy-HKLP - Turnigy Battery Strap 330mm $1.69
- Hobbyking 8 Point snap knife (5pcs/set) $0.79
quad build.png
 
Hi mate that will work, get more props the 250 eat props in a crash and do crash a lot due to them being fast
 
no missing parts? everything is compatible? and does the weight right now allow room for a fpv camera and the transmitters?
 
steelwall99 said:
Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2.. $25.10
Click to expand...
You should move up the a transmitter with an LCD screen, otherwise you'll need a special USB cable, app and computer to make even minor charges like, HELI or ACRO (which is what you'll need), servo reversing etc.

Programing Cable

 
Last edited:
You must log in or register to reply here.
Back
Top