First budget build

Z

Zoran Jovanovic

zoky4
Hello, I'm new to forum and only have experience flying with JJRC H8 Mini and after couple of hours learning to fly I'm hooked up. I want to build FPV mini quad and my budget is around 200$, I only have LiPo battery from airsoft which is 11.1V 1200mAH 25C is this battery good for quad? I have made build but I'm not sure if I'm missing something and if this will work:

http://www.banggood.com/ZMR250-H250...uadcopter-Multicopter-Frame-Kit-p-933189.html

http://www.banggood.com/Syma-X5C-1-...-Monitor-Real-Time-Transmission-p-980090.html

http://www.banggood.com/Kingkong-Fo...2A-Opto-ESC-For-RC-Multirotors-p-1005382.html

http://www.banggood.com/FlySky-FS-i...ransmitter-With-FS-iA6-Receiver-p-922606.html

Should I change some parts and is everything here enough for some apprentice build which i could use for some time without upgradeing too much?
Thank you all and Happy Christmas!

EDIT: I forgot to mention this build is 195$ and i got 10% discount for shopping from their app, btw I want order everything from one place preferably with free shipping
 
i found exact motor on banggood for 8,91$ which i think is acceptable on this link: http://www.banggood.com/KINGKONG-2204-2300KV-Brushless-Motor-for-RC-Multicopter-p-1015384.html
and concerning the camera kit i understand it has narrow FOV but it is probably going to be upgradeable in near future with different lens which i think might help and nice thing is that complete camera is exchangable so if really needed. I picked this one because it is cheapest set i found with 720p camera and if i buy parts independently it would cost more
 
I have recieved today battery I ordered for this build, still waiting for the parts. I ordered this battery:
http://www.banggood.com/Wholesale-B...-Battery-For-RC-Transmitter-C305-p-65643.html

as you can see this battery has JST plug, can i convert it to xt60, I want all XT60 plugs. I tested battery cables and they are 11,4V as they should be but i guess they have lower current A because cables are parallel connected to battery. should i put XT60 only on 2 wires(1 plug +/-) or should i connect all + cables tgoether to 1 + plug of XT60 and all - cables to 1 - plug of XT60? I hope you understand what I'm asking
 
Zoran Jovanovic said:
I have recieved today battery I ordered for this build, still waiting for the parts. I ordered this battery:
http://www.banggood.com/Wholesale-B...-Battery-For-RC-Transmitter-C305-p-65643.html
Click to expand...
I assume you got that to power your quad? If so it's a bad choice. That battery is meant for a very low current draw Transmitter, it basically replaces a bunch of alkalines. You'll note it has no 'C' rating. And also note the higher the C rating the more expensive the battery. You want one with a >25C rating (in that 2200mAh size), Check your motors max amp draw.

Something more like this, looks decent giving you ~17A/motor.
http://www.banggood.com/ZOP-Power-11_1V-2200MAH-30C-Lipo-Battery-XT60-Plug-p-967264.html
 
You must log in or register to reply here.
Back
Top