GJH105775

GJH105775

Moderator
Off and on From California, USA
Joined
Last seen
Messages
3,648
Reaction score
411
Points
83

Profile posts Latest activity Postings About

  • M
    my quadcopter is arming but only when two power supplies are given. one from lipo and other from LAPTOP through USB connector. still unfigured for me
    kindly help me to solve this issue
    GJH105775
    GJH105775
    Sure, just post a thread describing your issue and then reply here with the link. Makes it easier to follow along and gives others the opportunity to help.

    My first guess would be that it is related to your BEC or maybe you don't have a BEC(usually built into the ESCs or power distribution board if not separate).
    scnative
    My Eachine x220 Wizzard flew great for a few months... now it flips out after a short flight time. Black box shows number 3 motor goes to 100 % with sticks input at neutral hover. I replaced motors , esc's but still does the same thing. Is this a Flight controller problem ?
    GJH105775
    GJH105775
    If the blackbox logged that the input for motor 3 went to 100% then yes. Could you create a thread and post the blackbox files? It might be a problem in what channels are indexed or a mixing issue in the settings on the controller.

    Once you create a thread can you post the link here to let me know and to remind me?
    J
    i have built my first quadcopter its a zmr250 and I'm now on the task of configuring my cc3d with librepilot I've been trying for several days however when i try to configure my esc's they beep forever I've asked unmanned tech shop what the problem may be and they said that my esc's have entered programming mode i would love to know how to fix this as i really need these to work for my school project.
    M
    i am new to drones i have my first drone FEILUN FX-127 Chaser FPV Race Drone from ebay it powers and the controller makes the drone beeb when i turned it on but non of the keys on the controller seems to work I'm new to drone pls can you help
    i think there is another receiver added
    my screen always shows "disarmed" although i can feel the controller seem to connect good with my drone
    GJH105775
    GJH105775
    I've been busy lately, and might not be able to offer as much timely help.

    I suggest you make a thread under RTF repair as it will be easier for others and I to help and with multiple people helping it will give you a better response time with more ideas.
    GJH105775
    GJH105775
    The profile section section is not a very good format to give good answers
    R
    Can you help on a charging issue? Instructions state it should be red but it's always green?
    GJH105775
    GJH105775
    Check connections, sounds like the instructions are wrong, the battery is charged or the connection is incorrect. The last being likely if you know the battery is discharged.
    SamKulpa
    On cleanflight my pitch and roll are switched can i swap the ch 1 and 2 on my pwm reciever or should i reverse the wires in my transmitter gimbal
    GJH105775
    I'm finally back, or at least I will be fully back once I finish traveling sometime Tuesday.
    A
    Hi George, I am building a quadcopter and having some problem same as this video. https://www.youtube.com/watch?v=WP955kMh9Ds . I am using kk multi-copter control board V 2.15 , 2.4GHz 6-Channel Transmitter & Receiver, BLDC ESC 30 A ...
    GJH105775
    GJH105775
    P and I values need to be tuned for the roll/pitch (should be linked) and then later on the auto-level settings.
    D
    Hi is there any1 that would be able to help I have got a Sky drone pro had a couple of successful flights but after a little crash the drone only spins 2/3 blades on take off. If I rotate the drone then the blades to the left always spin so I no they all work just not all together. Would be greatful for any help sorting this
    Thanks Daz
    Sitherus
    Are you part of anonymous?
    View previous comments…
    GJH105775
    GJH105775
    As the group is in it's current state I strongly disagree with the actions and politically correctness that stepped in once they became a 'cool' thing in pop culture. For the most part they are more of a solution looking for a problem, and many would demonize or throw anything under the bus to make it into the news.


    In short no.
    Sitherus
    Sitherus
    I have a theory that anonymous is just a partion of the us government or another countries government that is trying to trick us in some way.
    GJH105775
    GJH105775
    saad
    hello GJH :) I'm student engineer, I look forward to get the basics (software and hardware) of building a quad-copter using arduino-uno. I want to master this one, please can you help me with a relevants books, or tutorials??? I got lost on internet I need guidance!
    Vishal Kumar
    I am new to quadcopter and designed one using kk 2.1.5, 11.1V 2200mAh battery, CT6B 6-channel receiver and transmitter. My problem is whatever I do motor 1 always remains in acceleration and its rpm is more as compared to other 3. I tried PI editor, acceleration trim but so far no luck. Even for slightest throttle it starts rotating as other dont'. I am using quadcopter X mode.
    • Like
    Reactions: Kabuki
    GJH105775
    GJH105775
    Can you create a thread for it? Makes it easy to follow and provide well formatted information.
    Gokul Giridhar
    LITHIUM POLYMER ( LI-PO) RECHARGEABLE BATTERY 11.1V 5200MAH 25C
    GJH105775
    GJH105775
    There we go. That is for a 400mm+ quad, and is has plenty of amp supply ability for most applications.
    Gokul Giridhar
    Why the battery amps more much than the max of the 4 x motors??
    GJH105775
    GJH105775
    A battery will only give the number of amps that are drawn from it, and drawing too many amps usually damages the battery. Now a "200 amp battery" makes it sound like the seller is listing something wrong or does not know what they are doing, or you are reading something wrong.
  • Loading…
  • Loading…
  • Loading…
Top