Reciever getting mad signals

S

Sportinger

New Member
Hello everyone,

i have build a micro quad and have an issue with the reciever.
I connected the LR1000 (frsky from furious fpv) via SbUS to my FC (HGLRC XJB f428).

fc and LR1000.jpg

after binding i get somehow crazy signals which can be influenzed by moving the stick on the taranis. I think this ais related to the wrong serial reciever provider which is set to spectrum by default although i got frsky. But if i switch to SBUS i dont get any signals at all

mad signals.gif

Iam obviousy doing something wrong. If somebody could give me a direction to look in, would be great !

b1.PNG b2.PNG

all the bests,

Sportinger
 
Last edited:
Hi mate just for a test disable the FPV this some times makes the receiver play up
I think Sbus needs to be turned on in the transmitters well FCB
 
i didnt install the VTX yet, just the Camera signal into the FC. should i disconnect this ? As one can tell iam not that familiar with everything, started half a year ago with tiny whoop, that was no problem. This is "the next" step for me ;)
on first build, i connected PPM from the board to the telemetrie on the reciever and sbus to sbus. A friend told me that this was not right because one ether needs PPM or Sbus, but not both. Perhaps i fired the reciever ?
 
Back
Top