R RC_Clay Member Jun 13, 2017 #1 I'm Stumped! Every time I move the Aelreron,I get an Elevator response too. I have done all the calibrations in the ZYX-M software, but, to no avail. Please help. thanks.......
I'm Stumped! Every time I move the Aelreron,I get an Elevator response too. I have done all the calibrations in the ZYX-M software, but, to no avail. Please help. thanks.......
RENOV8R Well-Known Member Jun 13, 2017 #2 Just go into the channel mapping tab of the SW and change channel 2 to channel 1/channel to channel 2
Just go into the channel mapping tab of the SW and change channel 2 to channel 1/channel to channel 2
Jackson USA member at large Jun 14, 2017 #3 RC_Clay said: I move the Aelreron,I get an Elevator response too Click to expand... Also make sure your TX is set to mode type> Airplane.
RC_Clay said: I move the Aelreron,I get an Elevator response too Click to expand... Also make sure your TX is set to mode type> Airplane.
RENOV8R Well-Known Member Jun 14, 2017 #4 Jackson said: Also make sure your TX is set to mode type> Airplane. Click to expand... I didn't notice the "too".
Jackson said: Also make sure your TX is set to mode type> Airplane. Click to expand... I didn't notice the "too".
