DroneFlight
Member
Hello all! I'm new to this forum, and I'm building my first quadcopter.
I've followed the guide of UAVFutures, the 99$ dollar drone, and the quadcopter works very well if I didn't have this problem.
The matter is that when I plug my battery on the drone, I can fly for about 20 seconds, and then the battery gets uncharged. I can also see the charge of the battery (on the panel "RX") that's going to be zero in 20 seconds on my radio controller. What could be the problem?
Here's the list of my components: (if it's needed i will post some photos about my wiring connections)
ZOP Power battery 14.8V 1400mAh 4S
Racerstar RS20Ax4 ESC
4x Racerstar Racing edition 2205 2300KV motors
SP Racing F3 Flight controller Acro
Matek System PDB
Lisam LS-210 Frame
WLtoys V950 RC 2-4s battery charger
Flysky fs-i6s radio transmitter with fs i-a6b receiver
Eachine VTX03 video transmitter
eachine 1000tvl camera
I've followed the guide of UAVFutures, the 99$ dollar drone, and the quadcopter works very well if I didn't have this problem.
The matter is that when I plug my battery on the drone, I can fly for about 20 seconds, and then the battery gets uncharged. I can also see the charge of the battery (on the panel "RX") that's going to be zero in 20 seconds on my radio controller. What could be the problem?
Here's the list of my components: (if it's needed i will post some photos about my wiring connections)
ZOP Power battery 14.8V 1400mAh 4S
Racerstar RS20Ax4 ESC
4x Racerstar Racing edition 2205 2300KV motors
SP Racing F3 Flight controller Acro
Matek System PDB
Lisam LS-210 Frame
WLtoys V950 RC 2-4s battery charger
Flysky fs-i6s radio transmitter with fs i-a6b receiver
Eachine VTX03 video transmitter
eachine 1000tvl camera