Hubsan H107d+ fpv Mod

[BigKahuna]

OK I’m a little confused a lot of the threads for this little quad are old I was going to do a antenna mod but my board is little bit different than the ones I’m seeing online the back of the controller says model no: fpv2
H107DTX on back if that helps when I opened the back up there is only a what I believe to be one antenna and that I believe is a 5.8 but where is the 2.4 ? Any help would be greatly appreciated

 

[LoneRCRanger]

Sorry, you could show me the workings of a toaster and I would understand as much. Sorry I can't help. Perhaps Holtneil or Army Vet can help you.

 

[ArmyVet]

Sorry, I have a 501 SS do not familiar with that one.

The official Hubsan forum may be of help.

https://forum.hubsan.com/

It is off the air at the moment. Seems to be the thing to do. Maintenance on Super Bowl day .

One word of caution. If it is still under warranty. Know that Factory reps monitor this forum and sometimes reply. HAHa

Good luck.

 

[holtneil]

The newer h107d is 5.8g the older was 2.4 they did the jump to give more range to the FPV sorry I don't know much more on the hubsan . But as Armyvet said try there forum ,there is a guy on rcgroups in the drone section has done a fair bit of mods to the hubsans

 

[Jackson]

but where is the 2.4 ?

Your pic is blurry, does it look squiggly like this?

 

[BigKahuna]

Nope no squiggles and crappy pic is all the board is clean

 

[BigKahuna]

This is the little guy I did a antenna mod and wide lense ... now if I can figure out the remote I’ll be good