Help binding Flysky FS-i6x to emax Tinyhawk

F

Friedrich Tint

Member
So i got my First quad the Tinyhawk and the Flysky FS-i6x transmitter, i set up my profile on flysky and go to bind mode by pressing the bind key while powering it on.
then i hold down the bind button on the tinyhawk while plugging in the battery, and it goes to bind mode indicated by the green Led but the transmitter still says RX Binding. .
and if i power them on the other way around the same result please halp i noob ^^
 
RENOV8R

RENOV8R

Well-Known Member
That is the correct procedure to bind your receiver. Sometimes it helps to put your transmitter into bind mode first and then place it a few steps away before powering your receiver
 
F

Friedrich Tint

Member
i have watched all the youtube videos on the topic, everything should be configured, i set both the transmitter and the quad to iBUS mode, but it does not bind, tough it does with the included reciever that came with the flysky fs-i6x
i dont know who to turn to, nobody i personally know has any drone experience :(
 
wafflejock

wafflejock

Well-Known Member
Friedrich Tint said:
i have watched all the youtube videos on the topic, everything should be configured, i set both the transmitter and the quad to iBUS mode, but it does not bind, tough it does with the included reciever that came with the flysky fs-i6x
i dont know who to turn to, nobody i personally know has any drone experience :(
Click to expand...
Have a link to the exact one you bought?

I just found one on getfpv.com but looks like it has FrSky receiver not FlySky. If the receiver you have that does bind isn't terribly large or you can take the plastic housing off of it and wrap it with electric tape then can put that on the quad and wire it up to the FC most likely (I've done this with the KingKong GT-90 because the spektrum receiver it came with I think only supported DSM2 and my transmitter would randomly drop signal with that protocol).
 
Dugdog47

Dugdog47

Well-Known Member
You found one that is compatible with flysky? I haven't seen those yet I must have missed the flysky version.

I'm a flysky guy and one reason I didn't get the tinyhawk is because they didn't make one that binds with flysky, the one for frsky won't bind for flysky if that's what you're trying.
 
You must log in or register to reply here.
Top