mynightmare
Member
After searching for days looking for a quadcopter forum I found what looks like a great community!!
A little about my self, I have been around R/C 4x4 Trucks both Nitro and Electric Brush less for a good 10+years. I stumbled on to Hubsan x4 H107l and C and had a lot of fun with them. That was a couple of years ago. Recently picked up another Hubsan H107l and some how came across DIY carbon fiber frames, chassis. I immediately fell in love with these and now have a brian storm of wanting to build my own 95-110mm indoor, back yard/small park flyer. I know I want 8.5mm motors but the flight control boards are confusing. I am looking at this flightboard,
https://hobbyking.com/en_us/flf3-evo-brushed-flight-controller-integrated-flsky-rx.html
I just don't understand what flysky transmitter and how to set it up for flight. Specifically flashing (if-its even needed) and settings. I have done plenty of soldering and have no fear of that. So I guess I have that going for me lol.
I am not looking to build this over night and really not into FPV (at least not yet). As I said I just want to build my own indoor, backyard/small park flyer. That's pretty much the only places I have or will fly.
I have also been looking at this,
http://www.banggood.com/Eachine-Tin...6-Transmitter-RTF-p-1097425.html?rmmds=search
However again I'm not looking at it for FPV. I like the lay out and how I could add it at a later time. Plus I really want to build my own. (Maybe copy this but with out the FPV)
Well My first post is turning into a book. So many questions
Any help, even pointing me in the correct direction/forum area is greatly appreciated!!
A little about my self, I have been around R/C 4x4 Trucks both Nitro and Electric Brush less for a good 10+years. I stumbled on to Hubsan x4 H107l and C and had a lot of fun with them. That was a couple of years ago. Recently picked up another Hubsan H107l and some how came across DIY carbon fiber frames, chassis. I immediately fell in love with these and now have a brian storm of wanting to build my own 95-110mm indoor, back yard/small park flyer. I know I want 8.5mm motors but the flight control boards are confusing. I am looking at this flightboard,
https://hobbyking.com/en_us/flf3-evo-brushed-flight-controller-integrated-flsky-rx.html
I just don't understand what flysky transmitter and how to set it up for flight. Specifically flashing (if-its even needed) and settings. I have done plenty of soldering and have no fear of that. So I guess I have that going for me lol.
I am not looking to build this over night and really not into FPV (at least not yet). As I said I just want to build my own indoor, backyard/small park flyer. That's pretty much the only places I have or will fly.
I have also been looking at this,
http://www.banggood.com/Eachine-Tin...6-Transmitter-RTF-p-1097425.html?rmmds=search
However again I'm not looking at it for FPV. I like the lay out and how I could add it at a later time. Plus I really want to build my own. (Maybe copy this but with out the FPV)
Well My first post is turning into a book. So many questions
Any help, even pointing me in the correct direction/forum area is greatly appreciated!!