filming on a Syma x5c problems

R

Robere42

Member
Just tried to do 1st time film. However when I brought the card back put into "supplied usb" port..all that comes up is TEST ?? I ensured the green light was on when I was filming/flying.. but cannot play anything back just says TEST....why everything so complicated for over 40's ?? Ha
 
I made the same mistake first time out.

You need the RED light to be blinking (looking at the bottom of the camera) when filming. Not the green light

Just push the camera button down once after syncing the X5C to the transmitter.
You should hear a beep telling you recording has started.

BE SURE to push the button down again BEFORE you switch the drone off to SAVE the video to the card or you will lose the video.

I think you're in for a real treat when you see how good the video looks and how clear the video and photos are.

For this price....I was pleasantly shocked.
 
Patton said:
I made the same mistake first time out.

You need the RED light to be blinking (looking at the bottom of the camera) when filming. Not the green light

Just push the camera button down once after syncing the X5C to the transmitter.
You should hear a beep telling you recording has started.

BE SURE to push the button down again BEFORE you switch the drone off to SAVE the video to the card or you will lose the video.

I think you're in for a real treat when you see how good the video looks and how clear the video and photos are.

For this price....I was pleasantly shocked.
Click to expand...
thanks for the reply
 
Must remember to press button again to save video !! Arrfgghh.....just had great flight through forest...got home forgot to save vid...one day I will get it right
 
You must log in or register to reply here.
Back
Top