Just tried to do 1st time film. However when I brought the card back put into "supplied usb" port..all that comes up is TEST ?? I ensured the green light was on when I was filming/flying.. but cannot play anything back just says TEST....why everything so complicated for over 40's ?? Ha
filming on a Syma x5c problems
- Thread starter Robere42
- Start date
Patton
Well-Known Member
I made the same mistake first time out.
You need the RED light to be blinking (looking at the bottom of the camera) when filming. Not the green light
Just push the camera button down once after syncing the X5C to the transmitter.
You should hear a beep telling you recording has started.
BE SURE to push the button down again BEFORE you switch the drone off to SAVE the video to the card or you will lose the video.
I think you're in for a real treat when you see how good the video looks and how clear the video and photos are.
For this price....I was pleasantly shocked.
You need the RED light to be blinking (looking at the bottom of the camera) when filming. Not the green light
Just push the camera button down once after syncing the X5C to the transmitter.
You should hear a beep telling you recording has started.
BE SURE to push the button down again BEFORE you switch the drone off to SAVE the video to the card or you will lose the video.
I think you're in for a real treat when you see how good the video looks and how clear the video and photos are.
For this price....I was pleasantly shocked.
thanks for the reply
patton..thanks all working now. But BUT ha. The sound to the recording seem way out of sync...looks weird
Patton
Well-Known Member
Can you post a sample video?
Ok will do..ta