Blade Glimpse

[Neutron]

hey y'all. Just wanted to say hello and see if anyone else has a blade glimpse. I'm brand new to flying quads and this is where I decided to start. I can't find much on modifying the glimpse or improving it so I figured I could post here about what I've done. Maybe I could help some other newbs starting out or spark some conversation from other veteran pilots that have a glimpse.

So far I've only worked on the camera. I mean I've modified other stuff but it was unintentional, like the frame and props in the way crash damage lol but the camera was out of focuse when I get it so I had to remove the camera from the housing and unscrew the lens slightly. That was kind of a pain because I was nervous about breaking it and the glue was kind of hard to break loose. I also flipped the camera housing upside down. This enables me to angle the camera upwards and downwards instead of only downwards.

Any input would be great!

-neutron

 

[holtneil]

Hi welcome to the forum , post some photos

 

[Neutron]

Here's my blade glimpse fpv with camer angle adjustments. It was pretty simple. Just remove the camera housing from the frame, pull the housing apart (its two pieces clipped together) and replace it around the camera lens upside down. If you want to do this and need additional instructions/pics, I'll do it again and post the steps. Happy flying

-Neutron


Camera angle down



Camera angle up



Camera level



I also left the TX out the back to hopefully improve range and reception. Haven't got the chance to test it quite yet. These Wyoming winter winds are vicious!