Any help appreciated

[Mark Blake]

got switches! really thought this would be easier, my setup hat to be 3124 on two different flight controllers, no idea why. set 4 additional switches, show up on cleanflight and work under receiver now just have to wire them. probably will be hardest part. learning more every time. Thank you very much for your help. I reset to two firmwares back still had the same channel issue saw a video on how to re assign the channels, worked fine, funny thing it was the same on two boards, both wrong on two different recievers? oh well fixed now. have a gimble, led's and gear and a hold. hop to get all this done eventually. have all the hardware, having more trouble with software and programming.

 

[mozquito1]

Sometimes it's hard explaining if ppl got different gear. Or may not know at all because of that. If you are new & walk in on all the abbreviations if can be confusing. so if you need confusing you know where we are.

 

[Mark Blake]

just when you thought you were getting somewhere.......I had flown this with an apm so I know the frigging thing will arm. now i cant get the esc's to arm. yes it is level in the app, i have watched at least 10 videos all explaining the same points. I have an arm switch enabled in cleanflight. it works on receiver page. added as arm. doesn't work. tried almost all stick options I can think of. no props. tried the power cycle thing, cant get the HW 30A esc's to arm. another thing trying to drive me to suicide. why does every step have to be different than anything 90% of builders have dealt with? every step at this point has been a nightmare search for the one person that had the same problem and decided to share it.

 

[Mark Blake]

tried BLheli wont even recognize the esc's. want to swear now.

 

[Mark Blake]

shows the motors as armed in cleanflight, shows the motors spinning up, but they dont. esc's just beep. hook a receiver up direct, they spin. getting really frigging aggrivated now. these flight controllers are some really finicky sons of bitches.every step has to be a god damn chore.

 

[mozquito1]

Sorry but get yourself an F3 all these problems will be gone. Your esc might not be compatible with naze32.
Nail it to the wall as a reminder not to buy another. It will be somthing with esc's but you have no passthrough to get at the esc's.