Search results

  1. DrDiff

    Naze32 not arming.

    Yes when I switch to receiver mode it shows the throttle moving through its range...
  2. DrDiff

    Naze32 not arming.

    Ok FlySky TH9X tx and FlySky rx. Afro Naze32 With Clear Flight 1.8.1 If I plug the esc into ch 3, the esc works and the motor spins. When the ESC's are plugged into the Naze, they chime when you plug in the battery. And if plugged into the computer the ESCs all spin their motors in synch...
  3. DrDiff

    My first quad build

    Well I had to re-soldier the motor on one ESC. I didn't cross them and it needed to be crossed. All 4 ESC's work and motors spin as they should. The next step is to solder the pins to the Naze32 and mount it.
  4. DrDiff

    My first quad build

    My ESC's came today and were installed. The problem is the 12 Gague Battery lead wire. I don't have 14 gague to make a propper battery lead. I also need to get M3 standoffs.
  5. DrDiff

    Difference between normal and reverse motors

    Thanks, now to find them in the USA
  6. DrDiff

    Difference between normal and reverse motors

    Thanks. I wish DYS sold spinners
  7. DrDiff

    My first quad build

    Airframe came last night. ESC's should be her today or tomorrow. I assembled the airframe and tore one of the rubber balls for the mobius mount.
  8. DrDiff

    Difference between normal and reverse motors

    What is the difference between normal rotation and reverse rotation motors? I would assume it is basically the thread of the shaft and retention nut. Now if I had 4 normal rotation motors and crossed the power leads of two of the motors and used M5 lock nuts on them? Would everything still...
  9. DrDiff

    My first quad build

    I found these ESC;'s on ebay and I had a 17 dollar Ebay Bucks certificate... So I pulled the trigger Emax SimonK 12
  10. DrDiff

    My first quad build

    Got an abusemark PDB. It is the same size as my Afro Naze32. Yes my joints are bad, I wanted to test the PDB with some LED strings. I will be getting a new soldering iron before soldering the connectors on my Afro Naze32
  11. DrDiff

    My first quad build

    Nobody has Afro 12's in stock, it is a good thing, I don't have cash for them right now.
  12. DrDiff

    My first quad build

    Well the Afro Naze32 arrived Unfortunately the break out cable wasn't included. So it is ordered.
  13. DrDiff

    My first quad build

    The Naze should arrive today. I have ordered motors and props. The Afro 12 esc's are still on back order.
  14. DrDiff

    ZMR 250

    I am waiting for my ZMR 250 to get here from the slow boat from China.
  15. DrDiff

    Naze 32... Base flight or Clear flight?

    I ordered my Acrobat Naze 32 today. I am going with clear flight.
  16. DrDiff

    FlySky TH9X

    I want to do the Smartieparts.com upgrade board and backlight mod. but I might convert to LiPo first.
  17. DrDiff

    FlySky TH9X

    I got my FlySky TH9X today.
  18. DrDiff

    Banked Turn Technique

    I am starting to think a left would mean roll left (right stick) and left rudder (left stick)
  19. DrDiff

    My first quad build

    ZMR 250 in fiberglass has shipped from Bang good. FlySky TH9X will be here Wednesday. I plan on using Afro 12's, a Naze 32 fcb, dys 1806's. The plan it to get it built and in the air. Then I will add video.
  20. DrDiff

    First build specs! need a little help

    I am getting a FlySky TH9X, and the same board for my first build. I have been told numerous times to flash it with clear flight and, it can be either docile as a newborn or as agressive as a seal team 6 member at the flick of a switch. As for batteries, take a look at Value Hobbies in...
Top