Search results

  1. GJH105775

    PIDs and stabilization

    Hahaha, you have only stabilization enabled, might have to enable auto-level if your FC supports it.
  2. GJH105775

    Naza to Spektrum help

    I can't say for sure, but I believe that both devices support PWM, and if that is the case then yes. The DSMX is the protocol used for the radio transmission and interpretation, so is between the reliever and transmitter and has no affect over any other things.
  3. GJH105775

    parts list check pleeeeaaasssee

    For those motors the ESCs are fine, though I might suggest bigger ESCs if you are getting micro ESCs with no heat sink.
  4. GJH105775

    parts list check pleeeeaaasssee

    I'd suggest you get 2204-2300kv motors like the multistar elite, and some 15-20 amp ESCs, also your battery sounds rather large. I should have taken the prop mounts off to show you the difference in the shafts, but the multistar 2300kv (green) motor's shaft is 5mm, while the DYS 2300kv...
  5. GJH105775

    Help me build a list

    Lifting a GoPro is what I was assuming your goal was, if you are not set on that, and your budget can't be increased a toy grade would do you nicely. They are getting better software, but their lifting capacities are generally limited.
  6. GJH105775

    PIDs and stabilization

    Hahah, sounds great, does teh drift get worse over time or not? If it does it could be low I gain.
  7. GJH105775

    Tarot first build

    It all looks good, though I might suggest that you buy the DYS ESC and motor bundle to save a little bit of money, or get the multistar elite motors for almost the same price and a lot better build quality.
  8. GJH105775

    Upgrade and mod a hubsan x4 h107d

    I would imagine that it would work either way, just an improvement to the range.
  9. GJH105775

    Help me build a list

    What are the chances of raising your budget to $200 or $250?
  10. GJH105775

    Syma X8C

  11. GJH105775

    Syma X8C

    Will not work as you need a tail servo to control the yaw axis any time you have an odd number of motor/props. Also it would require the motors to be in a different place relative to each other and the flight controller, which would require modification of the stabilization's math/algorithm...
  12. GJH105775

    Syma X8C

    Hahahaha
  13. GJH105775

    Syma X8C

    Hahaha, it is going to be a long line then, and I hate lines :P
  14. GJH105775

    Syma X8C

    If we could get paid cost of living and expenses to design and build things, I'm sure most of us would kill to get the job hahahaha.
  15. GJH105775

    Syma X8C

    hahaha subnetting is something that most people seem to either get 100% or not at all. It helps a lot to have an instructor that knows how to teach it well. With IPv6, subnetting is more of a formality to help the tech as you don't have broadcast domains to worry about hahaha. The...
  16. GJH105775

    H-430 Torpedo Quadcopter flying around my house

    Flys like a dream, so what is the approximate flight time?
  17. GJH105775

    help! my WLTOYS V686g shuts down just as it lifts off!

    Sounds like a low battery, have you checked the battery's voltage to make sure it is around 4v per cell?
  18. GJH105775

    Syma X8C

    Sounds great, looks like you will certainly be an asset to the forums. So did you go for a CCNA or CCNP in the Cisco networking academy? I am in it right now, and will confirm that they sure have watered it down from curriculum 10 years ago hahaha.
  19. GJH105775

    In need of information regarding ESC and Motor!

    Mam you'll ever pull on these would likely be 20 amps, so a 20 amp ESC that supports 3s-4s should work.
  20. GJH105775

    Sky drone pro - problem. Won't lift up

    Try again hahaha.
Top