hi, I decided i would like to build a low cost racing drone and would like to know if you can find any problems between these items?
.jpg)
The new Quanum Bundle is pairing the popular Quanum DIY FPV googles with the SkyZone 200FPV Plug-And-Fly set making this the most complete FPV combo available at an unbelievable price!
The Quanum DIY FPV goggles are the 2014 FPV product of the year, with a huge field of view and true non-blue screen 4.3inch monitor, customizable housing and focal choices at a price that made the FPV scene explode with new users.
The SkyZone 200 FPV set was bundled together by HobbyKing to be a true plug and fly experience. The set has the Video Transmitter, Receiver, FPV tuned Sony CCD camera and even a set of Circular polarized antennas. The best part is the complete no soldering plug-and-fly wiring harness. This pairs the camera to the video transmitter as well as power to the balance port on your flight pack battery. The receiver has all the required no solder wiring for video and a power splitter for the receiver and Quanum goggles to a standard XT60 connector.
This bundle is perfect for FPV beginners or seasoned Veterans as a simple, fast and fantastic great performing complete FPV set.
*Note: Lots more specs and information can be found on the Quanum DIY goggle and Skyzone 200 P&P set pages here:
FPV_Goggle_Set_with_Monitor_KIT_.html">Quanum DIY FPV Goggles
FPV_200_Set_With_TS5823_TX_RC832_RX_Sony_CCD_and_Circular_Polarized_Antennas.html">SkyZone 200 P&P FPV Set
Features:
• Large 4.3 Monitor for a huge FOV
• Customizable housing to fit all types of faces
• Will not fog like traditional goggles
• Plug-n-Fly connection. No soldering required
• Circular Polarized Antenna set included(LHCP)
• 32 channels: Cover A, B, E bands and F bands
• Two switching buttons for the band and channel with LED display on VRX
• Power off memory for last channel and band
• Dual Independent video and audio signal outputs
• Micro sized VTX and light weight - perfect for use with small models
• 32 channels: Cover A, B, E bands and F bands
• Transmitter frequency: 5645-5945MHz with 200mW power output
• Transmitting distance > ~1500m (open area)
• 480TVL Sony CCD FPV camera
Forget about using repurposed security camera equipment, the new Boscam TR1 is the next step in purpose built FPV gear. The TR1 houses a HD camera with recording function as well and a 200mw video transmitter in one small easy to mount package.
The camera has dynamic HD quality 1440x1080 30fps, while simultaneously transmitting a low latency FPV 5.8GHz video stream. This small, tidy package weighs just 42 grams making this the perfect size to strap on almost anything for FPV fun. The camera has a low distortion 130 degree field of view, with automatic exposure & white balance and the recording function uses up to a 32GB micro SD card for hours of video.
FPV just got a lot simpler with this all-In-one package. Simply connect to your battery and strap to your favorite RC model for FUN action.
Features:
• 720p recording
• 32GB micro SD card support
• 130 deg field of view lens (optimal for FPV)
• 5.8Ghz Video transmiter built in
Specs:
Video sensor: 1/3 CMOS 5.0 Mega Pixel
Lens: 2.6mm 130deg
Exposure: Automatic
White Balance: Automatic
Video: 1440x1080 30FPS
Trans Flash: Micro SD up to 32GB high speed
Transmitting power: 200mw
Transmitting Frequency: 5645~5945Ghz (8ch)
Size: 44x37x18mm
Weight: 40g
Connector: SMA-RP
Power: Via the multi-function port @12v or 5v @ the USB port
.jpg)
The Runner 250 is the latest offering from Walkera which is packed with innovative features specifically designed for the FPV Racing fraternity. The modular design of the runner 250 allows you to change out race damaged components in a matter of minutes.
The speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair between races.
The full carbon fiber main frame of the runner 250 is super compact and tough and can easily handle those inevitable high speed gate collisions while the built in forward and rear LED lights help you with orientation when flying the runner 250 in line of sight.
The optional* onboard OSD module overlays your flight footage with important race telemetry such as battery voltage and your runner 250's tilt angle.
This version of the Runner 250 comes supplied complete with built-in 2100Kv motors with matched ESC's, Runner 250 flight control system, 2.4Ghz Devo 7 transmitter, LiPoly battery and charger making the Runner 250 the perfect solution for beginners and pro FPV racers alike.
Features:
• Ready to fly 250 size racer
• Fully factory assembled, charge the battery and fly!
• Modular design for easy build and repair
• Self tightening toughened composite props
• Compact carbon fiber main frame
• Dampened camera mount platform
• Front and rear LED lights
• 12-14 mins flight time
Specs:
Frame Diameter: 250mm
Weight: 530g (with battery)
Transmitter: Mode 2 DEVO 7
Receiver: DEVO-RX710
Flight Controller: FCS-Runner 250
Brushless Motor: WK-WS-28-014 (CW/CCW)
Brushless ESC: Runner 250
Battery: 11.1V 2200mAh 25C 3S LiPo
Flight Time: 12~14mins
Working Temperature: -10?~ +40?
Included:
1 x RTF Runner 250 Quadcopter
1 x Mode 2 Devo 7 transmitter
1 x 11.1V 2200mAH LiPoly battery
1 x LiPoly charger and power adapter
Bump up the endurance of your Quanum, Fatshark, or any other set of 5.5mm socket equippedFPV goggles with this 7.4v Lipoly battery with a market-leading 1500 mAh capacity.
Double the capacity of the standard pack supplied with most goggles for a modest 15g weight increase!
With a handy self-adhesive clip supplied for convenient headstrap mounting, standard charge/discharge and balance leads, this high capacity battery is a must for serious FPV'ers.
Specs:
Voltage: 7.4v
Capacity: 1500mah
Dimensions: 66 x32 x 13mm
Weight: 60g
* Suit Fatshark goggles directly
The new Quanum Bundle is pairing the popular Quanum DIY FPV googles with the SkyZone 200FPV Plug-And-Fly set making this the most complete FPV combo available at an unbelievable price!
The Quanum DIY FPV goggles are the 2014 FPV product of the year, with a huge field of view and true non-blue screen 4.3inch monitor, customizable housing and focal choices at a price that made the FPV scene explode with new users.
The SkyZone 200 FPV set was bundled together by HobbyKing to be a true plug and fly experience. The set has the Video Transmitter, Receiver, FPV tuned Sony CCD camera and even a set of Circular polarized antennas. The best part is the complete no soldering plug-and-fly wiring harness. This pairs the camera to the video transmitter as well as power to the balance port on your flight pack battery. The receiver has all the required no solder wiring for video and a power splitter for the receiver and Quanum goggles to a standard XT60 connector.
This bundle is perfect for FPV beginners or seasoned Veterans as a simple, fast and fantastic great performing complete FPV set.
*Note: Lots more specs and information can be found on the Quanum DIY goggle and Skyzone 200 P&P set pages here:
FPV_Goggle_Set_with_Monitor_KIT_.html">Quanum DIY FPV Goggles
FPV_200_Set_With_TS5823_TX_RC832_RX_Sony_CCD_and_Circular_Polarized_Antennas.html">SkyZone 200 P&P FPV Set
Features:
• Large 4.3 Monitor for a huge FOV
• Customizable housing to fit all types of faces
• Will not fog like traditional goggles
• Plug-n-Fly connection. No soldering required
• Circular Polarized Antenna set included(LHCP)
• 32 channels: Cover A, B, E bands and F bands
• Two switching buttons for the band and channel with LED display on VRX
• Power off memory for last channel and band
• Dual Independent video and audio signal outputs
• Micro sized VTX and light weight - perfect for use with small models
• 32 channels: Cover A, B, E bands and F bands
• Transmitter frequency: 5645-5945MHz with 200mW power output
• Transmitting distance > ~1500m (open area)
• 480TVL Sony CCD FPV camera
Forget about using repurposed security camera equipment, the new Boscam TR1 is the next step in purpose built FPV gear. The TR1 houses a HD camera with recording function as well and a 200mw video transmitter in one small easy to mount package.
The camera has dynamic HD quality 1440x1080 30fps, while simultaneously transmitting a low latency FPV 5.8GHz video stream. This small, tidy package weighs just 42 grams making this the perfect size to strap on almost anything for FPV fun. The camera has a low distortion 130 degree field of view, with automatic exposure & white balance and the recording function uses up to a 32GB micro SD card for hours of video.
FPV just got a lot simpler with this all-In-one package. Simply connect to your battery and strap to your favorite RC model for FUN action.
Features:
• 720p recording
• 32GB micro SD card support
• 130 deg field of view lens (optimal for FPV)
• 5.8Ghz Video transmiter built in
Specs:
Video sensor: 1/3 CMOS 5.0 Mega Pixel
Lens: 2.6mm 130deg
Exposure: Automatic
White Balance: Automatic
Video: 1440x1080 30FPS
Trans Flash: Micro SD up to 32GB high speed
Transmitting power: 200mw
Transmitting Frequency: 5645~5945Ghz (8ch)
Size: 44x37x18mm
Weight: 40g
Connector: SMA-RP
Power: Via the multi-function port @12v or 5v @ the USB port
The Runner 250 is the latest offering from Walkera which is packed with innovative features specifically designed for the FPV Racing fraternity. The modular design of the runner 250 allows you to change out race damaged components in a matter of minutes.
The speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair between races.
The full carbon fiber main frame of the runner 250 is super compact and tough and can easily handle those inevitable high speed gate collisions while the built in forward and rear LED lights help you with orientation when flying the runner 250 in line of sight.
The optional* onboard OSD module overlays your flight footage with important race telemetry such as battery voltage and your runner 250's tilt angle.
This version of the Runner 250 comes supplied complete with built-in 2100Kv motors with matched ESC's, Runner 250 flight control system, 2.4Ghz Devo 7 transmitter, LiPoly battery and charger making the Runner 250 the perfect solution for beginners and pro FPV racers alike.
Features:
• Ready to fly 250 size racer
• Fully factory assembled, charge the battery and fly!
• Modular design for easy build and repair
• Self tightening toughened composite props
• Compact carbon fiber main frame
• Dampened camera mount platform
• Front and rear LED lights
• 12-14 mins flight time
Specs:
Frame Diameter: 250mm
Weight: 530g (with battery)
Transmitter: Mode 2 DEVO 7
Receiver: DEVO-RX710
Flight Controller: FCS-Runner 250
Brushless Motor: WK-WS-28-014 (CW/CCW)
Brushless ESC: Runner 250
Battery: 11.1V 2200mAh 25C 3S LiPo
Flight Time: 12~14mins
Working Temperature: -10?~ +40?
Included:
1 x RTF Runner 250 Quadcopter
1 x Mode 2 Devo 7 transmitter
1 x 11.1V 2200mAH LiPoly battery
1 x LiPoly charger and power adapter
Bump up the endurance of your Quanum, Fatshark, or any other set of 5.5mm socket equippedFPV goggles with this 7.4v Lipoly battery with a market-leading 1500 mAh capacity.
Double the capacity of the standard pack supplied with most goggles for a modest 15g weight increase!
With a handy self-adhesive clip supplied for convenient headstrap mounting, standard charge/discharge and balance leads, this high capacity battery is a must for serious FPV'ers.
Specs:
Voltage: 7.4v
Capacity: 1500mah
Dimensions: 66 x32 x 13mm
Weight: 60g
* Suit Fatshark goggles directly
.jpg)