which motor esc combo

R

ram1000

Well-Known Member
I'm building a 250 quad for my wife that I want to be very mild flying. I don't think I need kv2300 motors so which motor esc combo would I need to keep the quad able to hover and cruise mildly? Also is there one FCB that would fit these parameters best?
 
Hi mate I would still go for the 2300kv and 4 to 5 inch props and poss 20amp esc , you can adjust the stick scaling to tame the quad ,but you still need the power for a good flight , KK2.1.5 with steveis1.8s1pro is nice and stable and its easy to set up flight mode 1 tame ,flight mode to a bit more speed then flight mode 3 to all out
 
holtneil said:
Hi mate I would still go for the 2300kv and 4 to 5 inch props and poss 20amp esc , you can adjust the stick scaling to tame the quad ,but you still need the power for a good flight , KK2.1.5 with steveis1.8s1pro is nice and stable and its easy to set up flight mode 1 tame ,flight mode to a bit more speed then flight mode 3 to all out
Click to expand...
Thanks I'll go with those recommendations...do I need programed esc's I.E. "Simonxxx" or what is that about???
 
Hi ram1000 simonk is a code in the chip set of the esc it will make them faster to the throttle ( I will leave you a video to watch ) if you was going for multi star motors you would need BLheli, I use simonk flashed esc the ones in the video red 30 amp , they are spot on
If you want to flash the KK your need the flash tool
 
Back
Top