Trouble with wires on my sg906 pro 2 beast drone

H

Hitop

New Member
Hi was wondering if anyone could guide me in right direction my drone picked up wierd signal and crashed into side of house only thing damaged is my camera it has 3 axis gimbal but I had 3 wires come off and not sure where they go or even if I can hook them back up was wondering if anyone could help out with some kind of direction. There is 3 small wires on right side of where camera sits not sure where they go
 

Attachments

  • CC04231E-B46F-44B1-99D3-0FA9D6E4B25F.jpeg
    CC04231E-B46F-44B1-99D3-0FA9D6E4B25F.jpeg
    264.4 KB · Views: 4
  • 38A52226-049B-4E92-96A7-3C3D629D9F61.jpeg
    38A52226-049B-4E92-96A7-3C3D629D9F61.jpeg
    243.3 KB · Views: 4
If you have a soldering iron or get one and can learn to use it then you can always repair broken wires or replace components but some are harder to replace than others. In this case since wires torn shouldn't be that bad to repair but you'd need to get the gimbal housing/plastic off to see where the wires went to and strip back/rejoin the wires and cover with electric tape so they don't short/connect against anything or else find where the wires went to originally and desolder the old and add new wires (solder new ones on).
 
Back
Top